Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information > Roots blower information

A small and clever way to remove rust for Roots blower. Pay attention to the summary!

Source: Roots blower manufacturer Published on: 2023-03-07 Hits:

Roots blowers are usually installed outdoors, and rust is inevitable after the baptism of wind and rain. In order to prolong the service life of Roots blowers, Xinqianshun Roots blower manufacturer summarized the small tricks for preventing and removing rust of Roots blowers, which are summarized as follows:

 ①  Roots blower Remove rust with baking soda

Add water to soda powder to form a thick paste, and pay attention to consistency without runny nose at all. Use your fingers or a flat spreader to stick it to the rusty surface. Leave it on the affected area until it dries, and then inhibit and remove it. You may find some or even all of the rust loose and washed away. You can repeat this process as long as additional rust removal occurs with each application. If it is not affected, different cleaning technologies or commercial rust removal processes can be considered.
② There are some commercial derusting products. Because the impeller of Roots blower runs without friction in the body, it does not need lubrication, so that the discharged gas does not contain oil. It is the ideal pneumatic conveying gas source for chemical industry, food industry and other industries. Although there are some natural products, the cleaning solution to derusting is to use phosphoric acid. This chemical solution reacts to rust and converts into a water soluble compound that can be scrubbed quickly and easily. Although these types of vacuum cleaners can make cleaning derusting metal short work. If you choose to use this rust remover, pay close attention to safety and follow the detailed instructions provided on the packaging accurately. You may need to wear gloves and masks, as well as a long sleeved shirt and trousers when working with such cleaning products.

Roots blower

Take measures to remove rust from the metal surface of Roots blower once you notice it starts to develop. Roots blower uses the pressure difference of the blower to automatically send lubrication to the oil drip nozzle and drop it into the cylinder to reduce friction and noise, while keeping the gas in the cylinder from backflow. This type of blower is also called a sliding vane blower. The long rust seat has not been removed, and more damaging to its metal, it will eliminate difficulties. As soon as you see the rust stains begin to develop, try to remove the discoloration. Not only will it be easy to clean when rust is new, you will reduce the possibility of damage to your metal items.
Once you choose a rust removal cleaning method and you take care of the current problem, you need to take measures to keep the rust coming back from the future. Roots blower is mainly composed of the following six parts: motor, air filter, blower body, air chamber, base (also used as oil tank), and oil drip nozzle. The blower operates eccentrically by the rotor offset in the cylinder, and allows the volume change between the blades in the rotor slot to suck in, compress and discharge air. Seal the area with metal primer to prevent rust. You clean it and then apply one coat (or two) of paint. In addition, if it is possible and appropriate to consider some environmental changes that can cause rust problems to start, do so.
④ Rust Prevention of Roots Blower Body
Keeping metal surfaces rusty is the ideal solution to keep them in place of rust prevention measures. Rust often forms metal because it is exposed to water for a long time, so it is important to dry your things as many elements as possible. For example, keep your blower clean, waxed, and stored under a library or quality cover.

Will Roots blower felt lined lid made of heavy vinyl in your grill when not in use. Dry your cast-iron pan thoroughly before storage and periodically wipe it off with cooking oil during the season. Although not all rust can be prevented, being careful with your metal items can reduce the frequency, and you will have to deal with this particular type of cleaning challenge.

The above points are the small tricks of Roots blower for rust prevention and rust cleaning. I hope they can help you. If you have any questions, please feel free to consult us: 0531-83663588