Current location: home page > news information > Roots blower information

(The reason why roots blower adopts double oil tanks) Three blade roots blower shall adopt double oil tanks

Source: Roots blower manufacturer Published on: February 7, 2022 Hits:

Single tank Roots blower: this type is widely used in daily life. Basically, 8 out of 10 users use a single tank, which shows that it is widely used! When the customer uses the blower under 9.8-58.8kpa wind pressure, it is enough for Xiaobian to recommend using the Roots blower with a single oil tank. After all, the price is not as good as that of the dual oil tank, so it is economical! What problems should we pay attention to in daily use? When using a single oil tank, N220 load gear oil needs to be added on one side, and the grease (commonly known as butter) added on the other side is used for auxiliary refueling through external tools! It should be added every 2-3 months or so! Maintain the lubrication and wear of gears.

Double tank roots blower: some users think that when using a single tank, it is very troublesome to refuel later, and they may want to avoid refuelling for a longer period of time! To reduce the frequency of refueling, some users will choose the dual fuel tank type, but this is not the only reason to choose the dual fuel tank type. When the ambient pressure of the fan is between 60-70kpa, Xiaobian also actively recommends the user to use the dual oil tank. This method is to reduce the operating temperature of the fan gear part and the whole machine! So it is necessary to use dual fuel tanks! The price is hundreds of yuan more expensive than the single price!

Roots blower adopts double oil tanks:

1. Dual fuel tank design:

Compared with the grease lubrication of the fan with a single oil tank, the lubrication mode is changed. As the oil lubrication at both ends is adopted, the lubrication is more sufficient, the service life of the bearing is significantly increased, and the frequency of rotor damage of roots blower caused by bearing damage is avoided.

2. Low noise:

As the lubrication is more sufficient, the mechanical noise of fan with single oil tank is 6-8 decibels lower than that of ordinary fan with single oil tank.

3. Low temperature and high strength:

Since most of the mechanical parts are completely immersed in lubricating oil, it can effectively reduce the fan temperature and strengthen the mechanical fatigue strength of the main parts of the fan.

4. Simple maintenance:

Since the drive end of the traditional single oil tank fan adopts the method of injecting butter, the maintenance requirements in the use process are relatively high, especially the butter needs to be injected from the top of the fan oil tank. The actual butter loss can not be observed from the outside of the fan, and the butter loss is judged solely by the experience of the maintenance personnel.

I believe that after reading the above, you should also understand the reason why Roots Blower adopts dual oil tanks. I hope it will be helpful to you.

Text term label: Roots blower

Link to this article: //wuhanzhcs.com/html/news/n02/625.html

Previous: Functions and differences of three blade roots blower emptying valve:

Next: Operating Principle of Roots Blower and Structure Explanation of Roots Blower

Back to list