Current location: home page > news information > Roots blower information

Whole process of Roots blower maintenance - Xinqianshun Roots blower manufacturer

Source: Roots blower manufacturer Released on: November 23, 2021 Hits:

Analysis of Roots blower maintenance structure:

First of all, it is necessary to know which parts are composed of Roots blower. Roots blower is composed of casing, bearing, gear, impeller, motor, belt and silencer. When the roots blower breaks down, we can better judge which part of the roots blower is faulty. The roots blower manufacturer will introduce the maintenance process of the roots blower and how to carry out simple maintenance.

Maintenance process of Roots blower:

1. Before starting the roots blower, open the manual vent valve, check whether the oil tank and gear oil have reached the center of the oil meter, and rotate the roots blower impeller manually to see whether it is flexible. If it is flexible, press the start switch to slowly close the vent valve. Thus, Roots blower can operate with full load (overload operation must not be allowed).

2. Regularly arrange the staff to check the oil level line. If the gear oil is found to be lower than the center of the oil gauge, timely fill the gear oil. If oil leakage is found at the joint of the oil meter and oil plug, as well as the oil tank and wallboard, repair and replace them in time. Always replace the gear oil half a year.

Roots blower maintenance

3. If high-temperature grease is used for bearings, it shall be supplemented every three months to half a year, and high-temperature grease shall be replaced every year.

4. Please ensure smooth air circulation and perfect cooling measures in Roots blower room, ensure the cleanness of Roots blower room, and avoid blocking the inlet muffler or jamming the Roots blower due to excessive dust inhalation by Roots blower. The dust in the filter element of the inlet muffler must be cleaned regularly. If it cannot be cleaned or cannot be cleaned, please replace the filter element of the inlet muffler immediately.

5. Regularly check and adjust the belt tension, carry out maintenance, and internally check whether the bearings and gears of roots blower are excessively worn or damaged. Clean the oil tank and sealing device of Roots blower; Adjust the clearance of main parts of roots blower; Timely find and solve the fault of roots blower to prevent further damage to roots blower.

The above is about the maintenance of roots blower provided by the manufacturer of roots blower. We will continue to update it. Please continue to pay attention to:
Word tag: Roots blower
Article address: //wuhanzhcs.com/html/news/n02/882.html

Previous: Working principle of Roots blower - what is Roots blower used for?

Next: What is the difference between the intensive roots blower and the three blade roots blower?

Back to list