Current location: home page > news information > Roots blower information

Maintenance cycle and routine maintenance of Roots blower

Source: Roots blower manufacturer Published on: November 22, 2021-12 Hits:

Roots blower equipment needs maintenance during use. The use power and frequency of mechanical equipment are relatively large. If it is not maintained in time,
In case of failure, it will be very troublesome and waste money and material resources. Many customers will ask how often equipment such as Roots blower needs maintenance and

How to operate the warranty?

Maintenance cycle and routine maintenance of Roots blower

1. Roots blower needs to decide whether to clean the filter screen according to the dust conditions on the site. It is very convenient to clean the filter screen in time for later use, otherwise it will be stacked up
It's hard to clean.

2. Before starting roots blower, check the oil tank level and oil quality of roots blower on time, and add or replace oil in time; Newly produced Luo
The gear oil of the blower needs to be replaced after one month of operation, and the second new oil should be replaced after three months. The oil change period can be based on the oil quality and color
However, the maximum time shall not exceed half a year.

Maintenance cycle and routine maintenance of roots blower

3. The first time of Roots blower fan runs for 24 hours, adjust the tightness of the primary V-belt; Adjust the tightness of the belt for the second time after three to four days of operation; one

Adjust the belt 3 times after the week; One month later, it will be fine. Pay attention to more observation in the later period. If there is abnormal sound, excessive current and other abnormal conditions
Check the tightness of the belt, which may cause abnormal noise due to the tightness or looseness of the belt.

4. During the operation of Roots blower, the bearing surface temperature shall not exceed 95 ℃, the lubricating oil temperature shall not exceed 65 ℃, and the operation cannot be started if the temperature is too high.

5. If the temperature exceeds 40 ℃, corresponding cooling measures shall be taken, or failure will occur

These are some reasons why Roots blower needs attention and regular maintenance during use, Roots blower Its service life is closely related to regular maintenance
Off. In order to avoid excessive loss of roots blower for a long time, it must be maintained regularly.

Previous: The noise reduction of roots blower (the cause of the noise of roots blower) only needs three steps:

Next: The reason why the three blade roots blower can not be pressed is found (Summary of Roots blower problems)

Back to list