What are the maintenance skills of Roots blower?

As one of the important equipment in industrial production, Roots blower will inevitably have some failures or damages during use, which requires maintenance.

Here are some maintenance skills for Roots blower, hoping to be helpful to your production work.

First of all, it is necessary to understand the basic structure and working principle of Roots blower before maintenance.

Roots blower is composed of two meshing gears. The air is sucked in through the rotation of the gears and compressed before being discharged.

During maintenance, gear, shaft, bearing, seal and other parts need to be inspected and maintained.

Secondly, when disassembling Roots blower, attention should be paid to protecting vulnerable parts such as gears and bearings.

During disassembly, proper tools and methods shall be used to avoid unnecessary damage to these parts.

At the same time, the disassembled parts should also be cleaned and stored in categories to avoid confusion.

Next, when checking Roots blower, it is necessary to check gear, bearing and other parts first.

When checking the gear, it is necessary to observe whether there is wear, crack, etc. on its surface, and also to check the engagement of the gear.

When checking the bearing, it is necessary to observe whether it is loose, worn, etc., and check the condition of the lubricating oil.

If problems are found, they need to be replaced or repaired in time.

During the maintenance of Roots blower, attention should also be paid to safety issues.

During disassembly and inspection, power supply shall be cut off and necessary protective measures shall be taken to avoid accidents.

At the same time, during the maintenance of Roots blower, relevant operating procedures and safety standards shall be followed to ensure correct and safe operation.

To sum up, the maintenance of Roots blower requires a certain understanding of its basic structure and working principle, and attention should be paid to the protection of vulnerable parts, inspection of details, attention to safety issues, etc.

Only by doing so can we better maintain the normal operation of Roots blower and improve production efficiency and quality.