What are the characteristics of Roots blower?

Roots blower is used to purify air, gas and other harmful gases by conveying media, so as to ensure a clean and harmless production environment. Blowers are widely used in factory workshops. Then, what are the characteristics of Roots blower? The blower is used to purify air, gas and other harmful gases through conveying media, so as to ensure a clean and harmless production environment. Roots blower is widely used in factory workshops. What are the characteristics of Roots blower?

Features of Roots blower

1. The ordinary fan needs lubrication during operation, while the Roots blower impeller does not need friction and daily lubrication during operation, and the exhaust gas is clean and pollution-free.

2. The rotating speed is very fast, the clearance between parts is very small, the leakage is very small, and the working efficiency is relatively high.

3. The fan is composed of rotor, impeller, bearing and other parts, with stable structure and safe operation. However, the mechanical friction loss is very small, which is the reason for the long service life of Roots blower.

4. The flow rate can be determined by selecting the speed of the speed, which is affected by the speed.

If the blower is used for a long time, dust and dirt will accumulate. It is very important to do a good job of daily cleaning and maintenance, so as to ensure the normal operation of the blower and extend its service life.

Precautions in use of Roots blower

1. The supercharger shall not exceed the pressure value specified on the nameplate. Overload will damage fans and motors, and may even cause serious quality accidents. 2. During operation, the bearing temperature rise shall not exceed 75 and the lubricating oil temperature rise shall not exceed 45 。

3. Pay attention to the operation of the fan during operation. In case of any abnormal condition, stop the machine immediately for inspection and pay attention to the reading of the power meter. At the same time, regularly check the bearing temperature, lubricating oil temperature and lubricating oil level, and make records.

5. If the safety valve is frequently or continuously opened during operation, please stop the machine immediately to check whether the system is over pressured, and try again after the problem is solved.

6. When the system flow needs to be adjusted, the valve opening cannot be turned down for adjustment. The flow regulation of Roots blower can be realized by shunting or changing the speed within the allowable range.

7. When using water-cooled products, please keep the waterway unblocked. If the operation stops, drain the cooling water from all parts and dry them.

8. When the oil pointer is seriously polluted, it should be cleaned or replaced in time, so that the oil level can be clearly observed to ensure the normal lubrication of the fan.

The above is an introduction to the characteristics of Roots blower. Pay more attention when using the blower. If you consider buying a blower, you can contact Yuanxiang in time, and we will recommend satisfactory products for you.