Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
 Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information > Roots blower information

How to solve the problem when the temperature of Roots blower is too high?

Source: Roots blower manufacturer Published on: April 16, 2024 Hits:

How to solve the problem when the temperature of Roots blower is too high? The fan temperature is too high, which may be caused by the high bearing temperature, the high exhaust temperature, or the high outlet temperature in summer. How to solve this problem?

《1》 There is not much oil in the oil tank. If it is too thick or dirty, the oil level can be reduced or oil can be carried

《2》 Filter or silencer is blocked and clear the blockage

《3》 The pressure is higher than the specified value to reduce the differential pressure through the fan

《4》 The impeller is excessively worn, and the clearance is large. Repair clearance

《5》 Poor ventilation and high indoor temperature cause high inlet temperature, open the vent and reduce the indoor temperature

《6》 The running speed is too low, and the belt slips to increase the speed to prevent the belt from slipping