High pressure water cooling Roots Blower At the same speed and voltage, the greater the power, the greater the pressure generated. Power=voltage X current, that is, at the same speed and voltage, the greater the current, the greater the power, and the greater the pressure. The rotating speed of three-phase motor is fixed, and the motor load will increase after holding the voltage, which is easy to overcurrent and burn the motor.
The pressure range is 9.8 kPa to 98 kPa but not too high. The high-pressure water-cooled Roots blower is a displacement fan, and the air volume transported is proportional to the number of revolutions. Two impellers suck and exhaust three times every time the three blade impeller rotates. Compared with the two blade impeller, the gas pulse is less, the load change is small, the mechanical strength is high, the noise is low, and the vibration is small. Two three blade impellers are set on the two parallel shafts. There is always a small gap between the wheel and the inner hole surface of the elliptical case and between the three impellers. Because the impellers rotate at a constant speed in opposite directions, a certain amount of gas surrounded by the case and the impeller is transported from the suction side to the discharge side.
Shandong Xinqianshun Machinery Co., Ltd. is a professional supplier of high-pressure water-cooled roots blowers integrating design, development and sales. The company's products include high-pressure water-cooled roots blowers, roots blowers, centrifugal blowers, rotary blowers, single-stage high-speed centrifugal blowers and countercurrent cooling vacuum pumps. It mainly produces Roots blower, which absorbs advanced technology and relies on a new generation of high-efficiency and energy-saving products developed by scientific research institutes. With reasonable structure, small size, high efficiency, low noise, stable operation, long service life, convenient maintenance and other characteristics, it is widely used in sewage treatment, mining, metallurgy, chemicals, building materials, electricity, light industry, flour, aquaculture and other fields. Over the years, it has been well received by users.
