Current location: home page > news information > Roots blower information

Functions of Roots blower lubricating oil on bearings

Source: Roots blower manufacturer Published on: December 21, 2021 Hits:

99% of the equipment on the market needs to use lubricating oil, which can be said to be the basic element to ensure the operation of the machine. It is also our daily task to check the amount of lubricating oil in time.

The lubricating oil of Roots blower will experience performance aging and leakage consumption after a period of use, so it needs to be supplemented or replaced in time. It is usually supplemented every 3 months or so. Whether it needs to be replaced depends on the quality of the lubricating oil.

It is recommended to purchase special gear oil for fans in the use of lubricating oil for Roots blower. This is a local province of the province, where we should not save, we should not save. Check the oil level every day. The oil level is at the position where the oil moves through the middle. When the oil level is lower than the middle position, add lubricating oil immediately, and replace the lubricating oil every three months. Because even if it is injected every week, the dregs should be replaced frequently to prevent them from being polluted. If roots blower is just used, the gear oil must be replaced within one month.

Function of Roots blower lubricating oil: reduce friction. The existence of lubricating oil film can prevent direct contact with metal surface and greatly reduce wear through friction. When the cooling effect and rotating speed are high, friction will generate a lot of heat. If the generated heat is not consumed immediately, the temperature will rise and the equipment parts will burn. The protective effect of Roots blower metal parts are easy to rust, and the surface is coated with grease to prevent rust. The sealing function is to apply grease on the seal plate root and shaft seal to effectively seal, prevent leakage and prevent dust infiltration. The cleaning function, especially the circulating thin oil lubrication system, can continuously clean the friction surface, remove dust and dust, and do not damage the friction surface.

1. Increase the service life of bearings

The lubricating oil in the bearing can effectively reduce the wear of the bearing. The smaller the wear, the longer the service life of the bearing. We once received a customer who used Roots blower with broken bearings, but it only took 1 minute for the equipment to be damaged. The whole equipment was scrapped, and the reasons for bearing fracture really accumulated over the years.

2. Lubricating oil conduction temperature

The bearing will generate heat in the process of rotation, which can be transmitted through the lubricating oil to dissipate the heat, thus playing the role of cooling the bearing; Due to the thermal conductivity of lubricating oil, the quality of lubricating oil needs to be considered. When the temperature of lubricating oil is too high, we need to check the lubricating oil regularly in time to ensure the quality of lubricating oil.

For example, lubricating oil will also be added to the gearbox, and the importance of lubricating oil in this part can be more reflected. If there is no lubricating oil, the gears will occlude with each other, and damage will occur in a short time. This kind of phenomenon is also likely to occur in the case of insufficient lubricating oil.

3. Reduce wear of other parts

Functions of Roots blower lubricating oil on bearings

Bearing related spare parts include rings, rolling elements, and the use of lubricating oil can also effectively reduce the loss of these parts.

Note: The lubricating oil should not be too much or too little in use. It should be added according to the current situation of Roots blower. The gearbox with the largest amount of lubricating oil used by Roots blower is mainly used for heat conduction and lubrication. In the aspect of bearing lubrication, it also plays a major role in these two aspects. There are few failures of bearings, and they are also prone to failure if the operation and maintenance are improper. Therefore, scientific and reasonable use can maximize the service life of roots blower.

I believe that after reading the above contents, you should also have a better understanding of the role of Roots blower lubricating oil on bearings. I hope it will help you.

Text term label: Roots blower

Article address: //wuhanzhcs.com/html/news/n02/764.html

Previous: Difference between safety valve and vent valve of Roots blower

Next: Maintenance of Roots blower, simple discussion on solution to water inflow of Roots blower

Back to list