Aeration Roots blower

Current location: home page > Fan display > Classification by product use > Aeration fan

prev next

▍ Product Introduction / Product introduction

Aeration Roots blower is mainly used for sewage treatment aeration. Aquaculture aeration (also known as Roots aerator, fish pond aquaculture aerator) has reasonable structure, energy saving and consumption reduction, and simple maintenance. Welcome to consult our service hotline for the price of Roots blower!

Ordering hotline: 0531-83663588

▍ Product parameters / Product parameters

flow	0.45-226m?/ min
boost	0.1-1.6kgf/cm?
Motor power	0.55-630KW

▍ product details / Product Details

Introduction to aeration fan

Roots blower is composed of five parts: casing, wallboard, impeller, oil tank and muffler.

Casing: mainly used for supporting (wallboard, impeller, muffler) and fixing.
Wall plate: mainly used to connect the casing and the impeller, support the rotation of the impeller, and play the role of end sealing.
Impeller: it is the rotating part of Roots blower, which is divided into two leaves and three leaves. However, due to the advantages of three leaves, such as less air pulsation, less noise, and more stable operation than two leaves, it has gradually replaced the two leaves Roots blower.
Oil tank: mainly used to store lubricating oil used to lubricate gears and bearings.
Muffler: It is used to reduce the noise caused by air flow pulsation during the inlet and outlet of Roots blower.

Performance characteristics of aeration fan

Working Principle and Installation Precautions of Aeration Fan Aeration Roots Fan

(1) It has a certain air volume. The purpose of aeration is to increase enough dissolved oxygen in water or liquid to meet the oxygen demand of aerobic organisms

(2) The aeration process of the blower is the transfer process of molecular weight between gas and liquid. To make the gas fully diffuse and contact in the liquid and prevent the sinking of suspended solids in the liquid, the aeration fan must be able to generate sufficient pressure
1. Roots blower is equipped with a silencer and a silencing room. The sound of fan vibration is very small, almost silent, which effectively reduces noise pollution and brings convenience to enterprise production.
2. The impeller and shaft of Roots blower are of integral structure, and the impeller is free of wear, so that the working performance of the fan remains stable, the working performance remains unchanged, and the fan can operate well for a long time, with a longer service life.
3. Roots blower is equipped with a high-quality motor, with a temperature resistance rating of 180 degrees. The motor silicon steel sheet is made of high-grade cold rolled steel, with stable performance and more powerful power.
4. Roots blower is easy to install and its installation mode is flexible. The volume utilization rate of the fan is large, the volume efficiency is very high, and the structure of the fan is also very compact. Therefore, it is convenient and fast to install, and saves a lot of manpower, material resources and financial resources for enterprises. Work efficiency has also been constantly improved.
5. Roots blower is easy to clean and maintain. As long as the oil tank of three blade roots blower is cleaned regularly, it is recommended to replace all lubricating oil after 8 hours of operation. The fan should be overhauled once a year for a full body inspection. To ensure the good operation of wind roots blower.
Model selection parameters of aeration fan

Model selection parameters of aeration fan

Table of Air Pressure, Flow and Power Parameters of Aeration Roots Blower
model (Aeration Roots blower)	Air volume range （m?/min）	Motor power range (kw)	Outlet diameter	Fan weight （KG）	Pressure range	Voltage
Sr50	0.65-2.13	0.75-4	DN50	87-119	9.8kp-58.8kp	380V
Sr65	0.94-3.00	0.75-5.5	DN65	98-145
Sr80	2.34-5.22	2.2-7.5	DN80	156-200
Sr100	3.25-8.05	2.2-15	DN100	190-297
Sr125	5.35-11.7	3-18.5	DN125	285-401
Sr150	10.37-27.15	7.5-45	DN150	471-706
Sr175	19.65-38.67	11-75	DN175	601-1090
Sr200	27.65-57.14	15-90	DN200	975-1490
Sr-225	32.95-70.56	18.5-110	DN225	1080-1845
Sr-250s	35.83-76.72	18.5-132	DN250	1115-1936
Sr-250/300	61.4-114.8	30-160	DN250/300	1843-2761
Sr-300L/300L1	104.1-183.6	37-200	DN300	2031-3440
Sr-350/350L	105.5-226	37-280	DN350	3870-5700

(Note: This form is only for reference. If you need to order, please contact the phone at the top right corner of the website. After technical analysis, it will be customized according to the actual situation)

Applicable scope of aeration fan

(1) Air blast aeration for aquaculture

(2) Blowing aeration for sewage treatment

Aquaculture aeration

Aeration fan

Real shot of Roots blower manufacturer

Real shot of Roots blower manufacturer 2

Real shot of Roots blower manufacturer 3

Actual picture of Roots blower factory delivery

Shandong Xinqianshun Machinery Co., Ltd It is a specialty integrating design, development and sales Roots blower manufacturer The company is located in the east of Mingshui City, Zhangqiu City, Shandong Province, with extremely convenient transportation.
The company mainly produces XQSSR series Three blade roots blower 。 This product absorbs advanced technology and relies on a new generation of efficient and energy-saving products developed by scientific research institutes. It has reasonable structure, small size, high efficiency, low noise, stable operation, long service life, convenient maintenance and other characteristics, and is widely used in sewage treatment, mining, metallurgy, chemicals, building materials, electricity, light industry, flour, aquaculture and other fields. Over the years, it has been well received by users. The company always faces the future with new ideas, new attitudes, new perspectives, broad mind and unprecedented boldness 【 see more

Xinqianshun Roots blower manufacturer

Welcome to purchase our company's fans and put forward valuable suggestions. You can contact us through the following ways.

Shandong Xinqianshun Machinery Co., Ltd
Contact: Manager Liu
Telephone: 0531-83663588
mobile phone: 13181700788 return Roots Blower classification
Email: [email protected]
Address: Chengdong Industrial Park, Zhangqiu District, Shandong Province

label: Roots Blower ， Roots blower ， Three blade roots blower ， Aeration Roots blower

Products related to this product / Related Products

: Dilute phase medium and low pressure roots blower

: Dilute phase medium and low pressure roots blower

: Sewage treatment machine - sewage treatment plant