Roots aerator for aquaculture (Roots blower)

Roots blower aerator, referred to as Roots aerator, is an indispensable aerator in aquaculture. ① Roots aerator is characterized by small volume, large flow, low noise, high efficiency, energy saving, stable operation and long service life of traditional roots blower. ② The bottom aeration method is used to supply oxygen to aquatic animals. The vibration is small and the distance from the water body is far. The air is aerated into the water through the pipeline to increase oxygen evenly. ③ The company has sufficient production experience, product optimization and upgrading, simple maintenance and good after-sales service. Test comparison: install high-efficiency energy-saving roller

Consult now>>

Roots blower for calcium carbonate industry

The Roots blower for calcium carbonate is a constant volume fan, without internal compression, and the delivery of gas is mandatory. With the change of pressure, the flow changes little; The impeller adopts special curve to make the engagement more reasonable, with small leakage, high efficiency and low energy consumption, which is a new energy-saving product; The product adopts high-precision hard tooth surface synchronous gear, with long service life and low noise; The conveying gas is clean and free from any oily dust. The product has a wide range of air volume, dense grades, high pressure rise, nearly 20 models and more than 100 specifications. There is a wide range of calcium carbonate

Consult now>>

Gasification fan of ash silo in thermal power plant

The gasification fan is also called the gasification fan of ash silo in thermal power plant, and the electric dust removal gasification fan. It is mainly used in thermal power plants, with stable operation, energy conservation and consumption reduction. Welcome to consult.

Consult now>>

Oxidation Roots blower

The role of the oxidation fan is to accelerate the oxidation rate. For example, the oxidation fan of the power plant oxidizes calcium sulfite into calcium sulfate. Calcium sulfite can be oxidized under normal conditions, but in order to improve production efficiency, it is necessary to increase the oxygen supply and promote oxidation. Generally, roots blowers are used more. Roots blower is a positive displacement fan. The air volume transported is proportional to the number of revolutions. The gas is transported from the suction side to the discharge side by using the "meshing" of the impeller. The pressure is high.? Product details: Roots blower is set in oxygen

Consult now>>

Aeration Roots blower

? Composition of aeration roots blower Roots blower consists of five parts: casing, wallboard, impeller, oil tank and muffler. Casing: mainly used for supporting (wallboard, impeller, muffler) and fixing. Wall plate: mainly used to connect the casing and the impeller, support the rotation of the impeller, and play the role of end sealing. Impeller: It is the rotating part of Roots blower, divided into two leaves and three leaves. However, because of the advantages of three leaves, such as smaller outlet pulsation, less noise, and more stable operation than two leaves, it has gradually replaced

Consult now>>

Roots blower for sewage treatment aeration

Sewage aeration Roots blower is commonly used in sewage treatment of various industries. One of the most commonly used is the three leaf Roots blower, which is also known as Roots pump. Sewage treatment Roots blower is a small amount of sewage treatment system, with low noise and no negative impact. Sewage aeration Roots blower is generally used in rural sewage treatment, hospital sewage treatment, animal breeding sewage Urban domestic sewage, factory industrial wastewater, mobile toilet sewage, sewage treatment station. For Roots blower for sewage treatment, we are in daily management and start-up operation

Consult now>>