Pneumatic conveying roots blower

The pneumatic conveying roots blower is mainly used for pneumatic conveying roots blower vacuum feeding, particle transport, particle material transport, automatic batching and other food processing, metallurgy, fertilizer, blast furnace smelting industries. Roots blower is used for air supply, exhaust, drying, vacuum dehydration, aeration and oxygenation, and is widely used in food, power, docks, metallurgy, Mainly used in food, power, wharf, metallurgy and other industries, it is a kind of pneumatic conveying equipment. Our brand is Xinqianshun, and the origin is Jinan, Shandong Province

Consult now>>

Micro porous aeration roots blower

? The oxygen increasing principle uses microporous aeration roots blower to press the air into the gas transmission pipeline, send it into the microporous tube, and disperse it into the water in the form of microbubbles. The microbubbles rise and float from the bottom to promote the oxygen to be fully dissolved in the water, which can also cause the rotation and up and down flow of the water flow, so that the oxygen rich water in the upper layer of the pond can be brought into the bottom layer, realizing the uniform oxygen increasing of the pool water.? Structure installation microporous nano oxygen enrichment facilities mainly include host (motor), roots blower (speed 1400/min), gas storage buffer device (PVC plastic pipe)

Consult now>>

Roots type aerator

Introduction to Roots type aerator: Roots type aerator principle Roots type aerator (microporous aeration aerator) uses underwater aeration to supply oxygen to fish and shrimp, which solves the disadvantages of large vibration, high noise and uneven oxygen increase of traditional aerator. Roots blower is designed by optimizing itself after absorbing the advanced design experience at home and abroad. This product further improves the volumetric efficiency by using new lines on the impeller. It has small volume, large flow, low noise, high efficiency, energy saving, stable operation, and service life

Consult now>>

Double stage series three leaf roots blower

The two-stage roots blower is a device composed of two roots blowers in series. There are two three blade rotors with opposite directions inside each fan case. Each three blade rotor is supported by two bearings. A pair of high-precision synchronous spur gears are used to keep the relative positions of the two rotors constant. A certain clearance is maintained between the rotors and between the rotor and the case, and the rotor rotates without contact. Driven by the synchronous gear of the side box, the rotor separates the air inlet and outlet with the help of the "meshing" of the two rotors

Consult now>>

Double stage series roots blower

? Model parameters: The two-stage series roots blower is a customized roots blower, with higher pressure than the ordinary three blade roots blower, which is easy to use. Please refer to the following parameters. The specific parameter selection needs to be determined by technicians according to the actual situation. Model selection parameter table of two-stage series Roots blower Model two-stage series Roots blower) Air volume range (m?/min) Power range (kw) Outlet diameter Fan weight (KG) Pressure range Voltage Sr500.65-2.130.75-4DN5087

Consult now>>

XQSSR-50 Three blade Roots Blower

? Product introduction Roots blower consists of four parts: casing, wallboard, impeller, inlet and outlet muffler. Casing: mainly used to support wallboard, impeller, muffler and fixation. Wall plate: it is mainly used to connect the casing and impeller, support the rotation of the impeller, and play the role of end face sealing Impeller: it is the rotating part of Roots blower, divided into two leaves and three leaves. Now, because the three leaves have many advantages, such as less air pulsation, less noise, and stable operation than the two leaves, it has gradually replaced the two leaves Roots blower. Silence

Consult now>>