Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
 Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information

What should be paid attention to during the maintenance of Roots blower? Maintenance problems of Roots blower:

Source: Roots blower manufacturer Published on: November 10, 2021 Hits:
Roots blower It is a solvent type rotary gas powered machine. If the equipment suddenly fails during operation, we need to repair it by ourselves in order not to affect the normal operation. Before repair, we need to check the faulty parts of the equipment.
Roots blower It is used in all walks of life, and may need to be repaired after a long time of use or due to improper maintenance. What points should we pay attention to?
Step 1:
Let's check from the outside of Roots blower to see whether the fastening of each part and the locating pin are loose.
  What should be paid attention to during the maintenance of Roots blower? Maintenance problems of Roots blower
Step 2: Disassemble Roots blower. Before disassembling the machine, measure the matching dimensions of the machine, make records, and mark the parts to ensure that the original matching requirements are maintained after assembly. The disassembly marking should be clear. The disassembly sequence should be marked, and the location where the parts should be removed should be noted, Don't find the same parts after the fan is disassembled.
Step 3: Check whether there is oil leakage inside the Roots blower body and whether there is scaling, rust and scaling inside the body.
 
Step 4: The oil tank of the new machine or the overhauled Roots blower should be cleaned and put into operation according to the use steps. It is recommended to replace all lubricating oil after 8 hours of operation. The maintenance and overhaul shall be carried out on schedule according to the specific use conditions, and a reasonable maintenance system shall be formulated and recorded. It is recommended to overhaul once a year, and replace bearings and relevant vulnerable parts.
 
Note: It is recommended that the roots blower should be overhauled by professional maintenance personnel. If you don't understand the technology, don't do anything wrong. Otherwise, you can remove half of the blower by yourself. If you don't know how to deal with it, it will be troublesome to repair it again. It is recommended to contact the roots blower manufacturer first. If the problem is not serious, you can let the technician guide the repair by phone or video.
Article address: //wuhanzhcs.com/html/news/n02/993.html