Current location: home page > news information > Roots blower information

Talk about the maintenance of Roots blower filter in detail!

Source: Roots blower manufacturer Published on: December 10, 2021 Hits:

After the Roots blower has been used for a period of time, even if it works according to the normal operating procedures of Roots blower, the filter screen will still deposit many impurities, which will increase the pressure of the fan and decrease the flow rate. At this time, the filter screen should be cleaned in time to continue to use

When cleaning the filter, if the filter surface is dirty, it must be washed to achieve the effect (note: the filter cotton needs to be replaced at this time, and the filter cotton cannot achieve the filtering effect after washing). The Roots blower manufacturer said that when the filter surface is not dirty, clean compressed air can be used to dry clean on both sides until no dust particles can be seen by the eyes. If the stainless steel wire of the filter screen is deformed or damaged after cleaning, it should be replaced immediately.

When cleaning impurities, pay attention to the screen protection of the filter screen to avoid deformation or damage. Otherwise, the reinstalled filter screen will not play its due role. Clean the air filter every half month, and often form the habit of keeping the filter normal, which helps to avoid unnecessary trouble.

Roots Blower

Maintenance method for intake filter of Roots blower:

1. Clean the air filter screen once a month. When maintaining the filter screen of Roots blower, if the surface of the filter screen is very dirty, water washing is required to achieve the effect (note: the filter cotton needs to be replaced at this time, and the filter cotton cannot achieve the filtering effect after water washing.

2. When the surface of the filter screen is not very dirty, clean compressed air can be used to purge on both sides until no dust particles can be seen under the light.

3. If the filter screen is found damaged after cleaning, it needs to be replaced in time.

4. When cleaning impurities, pay attention to protecting the filter screen of Roots blower to prevent deformation and damage, otherwise the filter screen after reinstallation will not play its due role.

5. If the filter screen is deformed or damaged during maintenance, we need to replace the filter cotton ourselves.

Text label: Roots blower

Article address: //wuhanzhcs.com/html/news/n02/810.html

Previous: Roots blower maintenance: how to solve the problem of reverse rotation damage of roots blower

Next: What oil is used for Roots blower? Talking about the replacement of lubricating oil for Roots blower.

Back to list