Performance characteristics and maintenance of Roots blower for aquaculture

Performance characteristics and maintenance of aquaculture roots blower, and how to maintain aquaculture roots blower, the following will give you a detailed introduction!

1. There shall be no scaling, rust and scaling inside the aquaculture roots blower body.

2. Pay attention to whether the cooling condition of the lubricating oil is normal, pay attention to the quality of the lubricating oil, often listen to the blower for noise, and pay attention to whether the unit works under the condition that does not meet the requirements.

3. Sometimes the overload of aquaculture roots blower is not displayed immediately, so pay attention to the changes of inlet and exhaust pressure, bearing temperature and motor current to judge whether the machine operates normally.

4. When disassembling the machine, the matching dimensions of the machine shall be measured, recorded, and marked and oriented on the parts to ensure the assembly and maintain the original matching requirements.

5. The new machine or overhauled three blade roots blower shall be put into operation according to the operating procedures. It is recommended to replace all lubricating oil after 8 hours of operation.

Features of Roots blower for Longgu aquaculture:

1. High dissolved oxygen efficiency: due to the bubbles generated by ultra micro pore aeration, the contact surface with water in the water body is very large, the floating velocity is low, and the contact time is long, so the oxygen mass transfer efficiency is very high.

2. Activate water body: aquaculture fan is equipped with microporous aeration and oxygen increasing device, and sufficient dissolved oxygen enables the water body to establish a natural ecosystem and make the water live.

3. Enhance water purification function: aquaculture fan supporting microporous aeration oxygenation is underwater oxygenation, while other oxygenation is surface oxygenation, while aquaculture water body is mainly underwater hypoxia. The insoluble organic matter such as fat mud, organic excrement, residual deteriorated bait, etc. deposited at the bottom of the water body will consume a large amount of oxygen, while sufficient microporous aeration oxygenation, It can be transformed into organic matter dissolved and decomposed by microorganisms, so that the self purification function of water body can be restored and strengthened.

4. Ultra low energy consumption: due to the use of aquaculture fans for centralized oxygen supply and the supporting use of microporous aeration devices, the oxygen mass transfer efficiency is extremely high, so that the dissolved oxygen per unit water body can quickly reach more than 4.5mg/L, less than a quarter of the energy consumption of water tankers or impeller oxygen enrichment, which can greatly save the power cost of farmers.

5. Realize ecological aquaculture and improve aquaculture efficiency: continuous fan oxygenation provides sufficient dissolved oxygen for the water body, the self purification ability of the water body is restored and improved, the natural balance of bacteria and algae forms is built, the natural ecology of the water body is built, the viability of the aquaculture population is steadily improved, and the aquaculture efficiency is fully guaranteed.

6. Safety and environmental protection.

7. Convenient maintenance: the aquaculture fan adopts a centralized oxygen supply device and an independent air dispersion device, making the whole device light, durable, and easy to maintain.

8. Quiet aquaculture fan is equipped with microporous tube micro bubble oxygen enrichment. The aquaculture fan adopts unique design technology and operates silently. There is basically no sound on the water surface, which has no impact on fish, shrimp and crab. It is very suitable for the needs of some aquaculture varieties with high noise requirements! Especially suitable for raising shrimp and crab.