How to tighten the belt of Roots blower?

The adjustment of roots blower belt occurred in the assembly work before leaving the factory. In the article a few days ago, Xinqian Shun Blower has stated the assembly work of roots blower. If you don't understand something, you can click here to read it: the assembly of roots blower

The little knowledge that Xinqian Shun Fan wants to share with you today is: how is the fan belt adjusted? Before leaving the factory, after the belt is installed, the bolts on the motor will be adjusted so that the head and the gear of the motor are in the same horizontal position. After the head is installed, it is locked and the position is fixed, while the motor is movable. After the belt is installed, the position of the motor will be adjusted so that the belt is tightened. The belt can rotate 90 degrees if the tightness is appropriate.

How to replace the belt of Roots blower? First, remove the belt protective cover, which is installed on the base. After removal, loosen the bolts of the motor to allow the motor to move moderately. Then install the belt. After installation, fix the motor. After fixing, install the belt protective cover on the base to complete the belt installation.

Belt aging and replacement of Roots blower is very common. Therefore, if the belt breaks, do not panic. After turning off the motor, install the above operation.