How to operate when the triangle belt of Roots blower suddenly breaks during operation?

In the market, belt driven Roots blower is the mainstream. This type of Roots blower is more convenient to maintain and popular. The use of Roots blower for a long time will inevitably lead to belt fracture. If the V-belt of Roots blower suddenly breaks in use, how can we continue to operate? Let's look at a customer case:

Customer: How to operate the triangle belt of coal feeding Roots blower broken?

Answer: If the coal feeding Roots blower fails, the on-site personnel should be notified immediately to switch to the standby blower, which usually will not take too long. In case of failure of the head coal Roots blower, the kiln speed and material shall be reduced immediately during the process, and the tail coal shall be reduced. The kiln tail temperature shall be controlled slightly higher. After the standby blower is started in a short time, the head weighing shall be gradually started to gradually recover the kiln condition. The tail said that the Roots blower failed, and the feeding should be stopped immediately, and the slow kiln should be insulated. After the standby Roots blower is started, it is safer to raise the temperature and feed.

After the belt of Roots blower is broken, the blower needs to be treated immediately, and the standby Roots blower needs to be replaced. After the belt of Roots blower is replaced, it can be switched back to the working blower. In different industries, the use of Roots blower is different, and some industries can stop work for reprocessing, while some industries cannot stop work, and the standby blower needs to be replaced to continue working, For example, the Roots blower for aerating fish ponds, especially in modern breeding bases, may be on for a long time under high breeding conditions. If the belt of the Roots blower is broken at this time, the standby Roots blower must be turned on to replace the belt as soon as possible. If there is no standby aerator, other types of fans need to be turned on for oxygen supply.

After replacing the belt of Roots blower, what else do we need to do? After the belt of Roots blower is replaced, after the project is stopped, the blower needs to be checked to see if there are other faults. If it is simply the aging and fracture of the V-belt, there is no need to make a fuss. If there is a certain problem with the pulley of Roots blower, we need to pay attention to the fault of the pulley, It is also the cause of belt fracture.

Where can I buy Roots blower triangle belt? Generally speaking, as long as the Roots blower manufacturer basically has Roots blower V-belt, but the brand may be different. When we purchase Roots blower V-belt, we can purchase it by reporting the fan model parameters to them. If we are not sure about the purchased belt, we can contact the original manufacturer, This may make a better match.

The V-belt of Roots blower is a consumable item. We recommend the customer to purchase more than one spare belt when purchasing Roots blower. Once the belt is damaged, it can be replaced in time. If there is no spare belt, the problem may affect the use of the fan and delay our construction period. The same is true for purchasing Roots blower, We also suggest purchasing standby Roots blower. In case of failure, we need to connect the standby blower to ensure that the project will not stop working.

If you have questions about the purchase of roots blower or roots blower belt, you can contact our official customer service hotline.