Roots blower is mainly composed of five parts: casing, wallboard, impeller, oil tank and muffler. It is a simple equipment, so it is very easy to use and maintain in the later period, which is one of the advantages of Roots blower.
The outlet pressure of Roots blower can be adjusted. Because of its adjustable pressure, it is also widely used in many industries, not only in aquaculture oxygenation, sewage treatment aeration, etc., but also in cement transportation and other industries. Because some equipment vibrates greatly during operation, it is easy to make a lot of noise. However, Roots blower has been improved, with low vibration and noise. Roots blower impeller is relatively wear-resistant and has a long performance, so its service performance is stable and its service life is long.
The application of Roots blower is very flexible. The outlet pressure of Roots blower can be adjusted, so it can cope with various operating environments. When you carefully observe the application of Roots blower, you will find that it can not only be used in aquaculture oxygenation, sewage treatment aeration and other places. It can also play an important role in cement transportation and other industries.
What are the characteristics of Roots blower? It is a device that can control noise. Because some equipment vibrates greatly during operation, it is easy to make a lot of noise. However, Roots blower has been improved, with low vibration and noise. Now more and more people like Roots blower because it is a kind of equipment with stable operation performance. Because some equipment may be flexible at the beginning, but after a long time, it will cause failure due to wear and tear. However, the Roots blower impeller is not worn, and the fan has a long performance, so the service performance is stable and the service life is long.
The high negative pressure at the inlet of Roots blower will not affect the outlet pressure. Generally, in many working conditions, the inlet and outlet of Roots blower are directly connected to the pipeline. In some cases, there is a certain pressure at the inlet of the blower. The pressure from the rear gas will not affect the blower as long as it is not too large. If the inlet pressure is too large, The fan is also unable to operate normally. The pressure of roots blower is the pressure rise. The outlet pressure minus the inlet pressure is the pressure rise required by the blower. Generally, the inlet pressure should not exceed 40kpa, and the pressure rise should not exceed 240kpa. Roots blower can meet the requirements.
I believe that after reading the above, you should also understand the advantages of the outlet pressure of Roots blower. I hope it will help you.
Text label: Roots blower
Link to this article: //wuhanzhcs.com/html/news/n02/687.html
