How can Roots blower be maintained and have a longer service life?

Many customers we cooperate with have asked Xiaobian how to maintain their roots blowers, because they generally pay more attention to how to maintain roots blowers to extend their service life. Today, I will take a look at how to maintain the Roots blower.

1. Check the fastening of each part and whether the locating pin is loose. If it is loose, tighten it.

2. Whether there is oil leakage inside the blower body.

3. There shall be no scaling, rust and scaling inside the blower body.

4. Pay attention to whether the cooling condition of the lubricating oil is normal, pay attention to the quality of the lubricating oil, often listen to the blower for noise, and pay attention to whether the unit works under the condition that does not meet the requirements.

5. Sometimes the overload of the blower is not displayed immediately, so pay attention to the changes of the inlet and exhaust pressure, bearing temperature and motor current to judge whether the machine operates normally.

6. When disassembling the machine, measure the matching dimensions of the machine, make records, and mark and orient the parts to ensure that the original matching requirements can be maintained.

7. The new machine or the overhauled blower shall be put into operation according to the use steps. It is recommended to replace all lubricating oil after 8 hours of operation.

8. Under normal conditions, the lubricating oil must be replaced when the unit runs for 1000 hours. The after-sales service that does not change the oil on time is not within the scope of free three guarantees.

9. Daily maintenance is very important, and minor faults must be repaired before being put into use.

Xinqianshun Roots Blower Manufacturing Co., Ltd. is a company focusing on Roots blower and three leaf Roots blower. If you are interested, please call for consultation.