How to prevent the belt of Roots blower from breaking?

How to prevent the belt of Roots blower from breaking? In the production process, if the belt is an important part of Roots blower, if the operation is not easy, it is easy to cause the belt to break. How can we prevent this phenomenon and the danger of belt breakage? Today, we will analyze the following aspects to prevent the belt of Roots blower from breaking:

First, start the fan with no load before the fan runs. After starting, load it and avoid V-belt after running.

Secondly, the pulley between the motor and the fan should be parallel, which is the key position. If it is not parallel, it will affect the operation of the V-belt, and it is easy to fall off. In addition, the diameter of the pulley should meet the standard, which directly affects the service life of the V-belt. After processing, the diameter is larger, which can better reduce the loss of V-belt.

Third, if the V-belt slips, the temperature may rise too fast, which may lead to aging or even breaking of the rubber of the V-belt. Therefore, be sure to check whether the V-belt will slip during normal use. Question.

Replacement cycle of Roots blower:

1. Roots blower is usually replaced once a year;

2. If there are cracks, please replace them in time. Even if it is less than a year ago, there are cracks on the belt. If there are signs of serious damage, please replace it in time;

3. If the condition worsens seriously, please replace it in time. Roots blower has multiple belts. If one of them is broken, please replace it in time. In order to ensure the overall tension of the belt, the small braid reminds everyone to replace the belt. Replace another old belt together.