Roots Blower How to deal with belt heating? As one of the integral parts of Roots blower, the belt of Roots blower plays a pivotal role in the linkage between its motor and fan. However, the heating of the fan pulley is common in the process of the fan, which makes customers wonder whether there is a quality problem with the fan? Today, I bring you the solution to the problem of Roots blower belt heating? 1. The reason for the problem of roots blower belt is usually that the belt is too loose, which will lead to the heating of roots blower belt. The manufacturer should adjust the belt of Roots blower to the proper tightness before leaving the factory, so as to ensure smooth operation of the blower. The excessively loose belt will not only cause heat, but also cause falling off and damage.
2. Too tight belt will also cause belt heating, and will affect fan linkage. It will be lost in the power transmission process, and too tight belt may even break in the operation process. Therefore, whether it is too loose or too tight, it is not good. Therefore, fan manufacturers should strictly test all aspects of the fan indicators when leaving the factory to ensure that the fan operates perfectly. 3. The belt of Roots blower is even hotter in summer. Some customers splash water on the belt in order to cool the fan belt. I remind you that this method is very wrong. Although it will lower the belt temperature, it will seriously affect the fit between the belt and the pulley, and reduce the friction resulting in insufficient power transmission and slipping. If the water flows into the fan carelessly, the impeller inside the fan will rust, and it will lock up for a long time, causing damage to Roots fan.
