Current location: home page > news information > Roots blower information

Popularize the solution of Roots blower oil leakage _ Roots blower

Source: Roots blower manufacturer Published on: December 9, 2021-12 Hits:

During the operation of Roots blower, confirm whether there is enough lubricating oil. Insufficient lubricating oil will lead to excessive meshing of gears and direct damage of gears. In order to ensure sufficient lubricating oil, add lubricating oil continuously to the leaking Roots blower to avoid too little lubricating oil. This may lead to excessive consumption of lubricating oil.

There are many reasons for the oil leakage of Roots blower. First, solve the oil seal problem. Replace the oil rod of the leaking Roots blower and see the effect. The oil rod of Roots blower must be high temperature. Otherwise, the effect of oil leakage treatment is not good.

Secondly, check the wear of the main shaft. If there is serious wear and roughness, it is better to work professionally. Apply oil on the last oil seal and grease on the inner diameter of the oil seal for installation. Initial operation can also prevent oil lubrication. In order to prevent the collision of the main shaft, many enterprises do not notice whether the main shaft processed by workers is collided in the process of processing the main shaft. When the main shaft encounters one or more concave and convex points, use the best oil stick to leak oil or soak oil along the concave and convex points.

Roots blower is divided into internal oil leakage and external oil leakage. Most customers report external oil leakage. It is difficult to find the internal lubricating oil leakage of Roots blower. There are three solutions to the external oil leakage of Roots blower oil tank.

1. Reasonable oiling

When the roots blower injects lubricating oil into the oil tank, look at the oil indicating hole. The oil level can reach the red line of the oil indicating hole. Do not inject too much. Too much lubricating oil is very easy to be splashed out.

2. Internal reconstruction of oil tank

Solution to oil leakage of Roots blower

The lubricating gear of Roots blower oil tank is splash lubrication, and the lubricating oil driven by the gear will splash inside. Therefore, as long as the structure of the oil tank is improved, good results can be achieved. The main improvement is to add an oil baffle at the outlet of the oil tank lubricating oil. This effect is very good.

But many manufacturers do not improve the fuel tank? Why is this? First of all, under the condition of reasonable oil injection, the fan will not leak oil; Secondly, the oil tank transformation will increase the cost of raw materials; In addition, the tank transformation will increase the production process, and the overall labor cost will also increase accordingly. Therefore, many manufacturers feel that this is a painless problem. In order to save costs, in most cases, suppliers will verbally instruct customers to pay attention to this problem.

3. External reconstruction of oil tank

Many customers have done the external modification of the fuel tank. The height of the oil injection hole is increased, and a steel pipe is welded directly, which can also solve the problem of oil leakage. Comparatively speaking, the third method can be operated by qualified friends with high cost performance, and generally, welding tools can solve this problem.

Text label: Roots blower

Article address: //wuhanzhcs.com/html/news/n02/815.html

Previous: Roots blower maintenance: inspection method for roots blower coupling

Next: Analyze the main causes of roots blower tripping fault:

Back to list