Roots blower The inlet filter is blocked: the silencer at the inlet of Roots blower contains a filter, which has the effect of filtering impurities in the air. Over time, too many impurities accumulate inside, and if the inlet is blocked, the air volume will be reduced. Therefore, we need to clean the inlet filter regularly to keep the air inlet unblocked. Belt slippage: no matter how good the quality is, the belt also has a life span. If the time is long, the belt should be replaced in time. Also, the V-belt should be adjusted at intervals during use. If the belt is loose, we regret the slippage or insufficient air flow of the fan.
Pipe air leakage: Roots blower is a pipe fan, which transports gas through pipes. The damaged pipe gas will naturally cause insufficient air volume when it runs into the air, so the field staff should check in time at ordinary times. If the pipe is damaged or leaked, it should be repaired in time.
The pipe is too long: if the pipe is too long and the pressure is insufficient, the air volume will also be insufficient. At this time, the pipe needs to be reset.
Pipe blockage: during the operation of Roots blower, we cannot guarantee that the pipe is always unblocked. If the pipe is blocked for some reasons, the pressure will increase. At this time, the air volume will be unstable, which will lead to the instantaneous air volume being too high or too low. If this happens, you must stop the machine in time for inspection.
