What are the characteristics of water-cooled roots blower?

The water-cooled roots blower is usually used in high-pressure occasions. The two impellers rotate relative to each other. Since the clearance between the impeller and the impeller, between the impeller and the housing, and between the impeller and the wall is very small, a vacuum will be formed at the air inlet.

Air enters the intake chamber under the action of atmospheric pressure. During the rotation of the impeller, the air in the intake cavity is continuously brought into the exhaust cavity through the sealing cavity formed by two blades, and the impellers in the exhaust cavity are meshed due to the mutual connection, thus extruding the air Between two blades for continuous operation, air is continuously conveyed from the air inlet to the air outlet, which is the whole working process of water-cooled roots blower.

Features of water-cooled roots blower:

1. High pressure: The water-cooled roots blower uses water-cooled bearings and gears, which reduces the temperature of the blower and extends its service life.

1. The fan adopts a three blade rotor structure. The structure of the air inlet and outlet inside the housing is reasonable, and the fan has low vibration and noise.

2. The impeller is free of wear, the fan performance remains unchanged, and it can operate continuously for a long time.

3. The fan has large volume utilization rate, high volume efficiency, compact structure and flexible installation methods.

4. The selection of bearings is reasonable, and the service life of each bearing is even, thus extending the service life of the fan!

5. The fan oil seal is made of imported fluororubber material, which is high temperature resistant, wear-resistant and has a long service life.