Roots blower Maintenance is very important during normal use. As long as you pay attention to the daily maintenance of roots blower, there will be no problem. How to replace the oil of roots blower? Next, Xinqian Shun fan manufacturer will introduce it to you. 1. Gear oil replacement sequence of Roots blower:
Remove the gear oil first, and then inject new gear oil. For the first time, replace it one month after startup, three months later, and replace it every half a year for long-term operation. Pay attention to the oil level daily and replenish it in time.
2. Evaluation of lubricating oil quantity of Roots blower:
The oil level of each model of Roots blower can be checked at any time to keep the oil level between the center line during shutdown. If the oil level is lower than the middle position, lubricating oil must be added in time; If the oil level is higher than the middle position, the oil temperature will be high, the exhaust body will spray oil, and the engine body will leak oil.
3. Storage of lubricating oil for Roots blower:
After filling the gear oil, the remaining gear oil shall not be directly exposed to the outside world to prevent other pollutants from entering the barrel and causing oil pollution; Secondly, oil products shall be kept away from fire sources and fire extinguishing equipment shall be placed. After use, tighten the sealing cap to keep the oil drum sealed. The new oil and waste oil shall be placed separately, and the container with waste oil shall not be filled with new oil to prevent pollution.
