Roots blower belt is an important part of the fan. In fact, the heating of roots blower belt is caused by many factors. Today, I will take you to understand the cause of the heating of Roots blower belt.
The reason for the problem of roots blower belt is usually that the belt is too loose, which will lead to the heating of roots blower belt. Before the roots blower leaves the factory, adjust the belt of the fan to a proper fastening state to ensure smooth operation of the fan. Loose belt will not only generate heat, but also fall off.
Too tight belt will also cause belt heating, affect fan connection, and will be lost during transmission. The over tensioned belt may even break during operation, so the belt is too tight even if it is too loose. Therefore, we will strictly test all aspects of the fan performance in the factory to ensure the stable operation of the fan.
The belt of Roots blower has higher heat in summer. Some customers want to pour water on the belt to cool the fan belt. This method is very wrong, although it will reduce the belt temperature. However, it will seriously affect the belt and pulley, and reduce the conflict caused by power transmission and slip. If the water accidentally flows into the fan, the internal impeller of the fan will rust and lock for a long time, thus causing damage to the roots blower.
Treatment method for belt heating of Roots blower:
1. The reason for the problem of roots blower belt is usually that the belt is too loose, which will lead to the heating of roots blower belt. Before the roots blower leaves the factory, the manufacturer should adjust the belt of the blower to the proper tightness, so as to ensure smooth operation of the blower. The excessively loose belt will not only cause heat, but also cause falling off and damage.
2. Too tight belt will also lead to belt heating, and will affect the linkage of the blower. It will be lost in the power transmission process, and too tight belt may even break in the operation process. Therefore, whether it is too loose or too tight is not good. Therefore, manufacturers should strictly test all aspects of the blower indicators when leaving the factory.
3. Roots blower belt is even hotter in summer. Some customers splash water on the belt in order to cool the blower belt. Xiao Bian reminds you that this method is very wrong. Although it will lower the belt temperature, it will seriously affect the fit between the belt and the leather pulley, and reduce the occurrence of insufficient power transmission and slipping caused by friction. If the water flows into the fan carelessly, the impeller inside the blower will rust, and will lock up after a long time, resulting in damage to the roots blower.
I believe that after reading the above content, you should also understand the causes of Roots blower belt heating. I hope it will help you.
Text term label: Roots blower
Link to this article: //wuhanzhcs.com/html/news/n02/607.html
