Because the quality is unqualified or there is a large error in the detection, it will cause some fault problems of Roots blower, such as oil leakage fault of Roots blower. What are the reasons for the oil leakage fault of Roots blower?
During the operation of Roots blower, sufficient lubricating oil must be ensured. Insufficient lubricating oil will lead to excessive gear meshing friction, which will directly cause gear damage. In order to ensure sufficient lubricating oil, the leaking Roots blower will constantly add lubricating oil to prevent too little lubricating oil, which will largely cause excessive consumption of lubricating oil.
There are many reasons for the oil leakage of Roots blower. First, solve the problem of oil seal. Replace the oil seal of the leaking Roots blower and check the effect. The oil seal of Roots blower must be high temperature resistant, otherwise the effect of oil leakage treatment will be unsatisfactory.
Secondly, check the wear of the main shaft. If there is serious wear and roughness, it is recommended to deal with it. Professional work is required. Finally, apply oil to the oil seal, and apply grease to the inner diameter of the oil seal for installation. It can also prevent the first operation without oil lubrication. To prevent the main shaft from bumping, while processing the main shaft, many enterprises do not notice whether the main shaft processed by workers is bumping. If the main shaft bumps one or more concave and convex points, the best oil seal will leak oil or soak oil along these concave and convex points.
1. Roots blower has dirt
If there are many impurities on the impeller of Roots blower, the gap of Roots blower is too small, which will affect the normal operation of the blower. The poor exhaust of the blower and excessive vibration of Roots blower will affect the compactness of the overall structure of Roots blower, which may cause oil leakage of Roots blower in the long run.
2. Inject too much lubricating oil manually
When we inject lubricating oil, we must inject according to the standard to avoid injecting too much lubricating oil.
3. The processing of the oil tank end cover is unqualified
The quality problem of the oil tank causes cracks in the oil tank, or some external force causes limited damage, which will also lead to oil leakage of Roots blower.
4. The bearing is excessively worn
The bearing is excessively worn, resulting in increased play and oil leakage. There are other reasons for the oil leakage of Roots blower, most of which are caused by the quality problems and unscientific operation of Roots blower.
I believe that after reading the above contents, you should also understand the cause of Roots blower oil leakage fault. I hope it will be helpful to you.
Text label: Roots blower
Link to this article: //wuhanzhcs.com/html/news/n02/713.html
