What do you need to know to operate Roots blower?

What do you need to know to operate Roots blower? Roots blower, also known as Roots blower, is a volume rotary blower. It uses three blade rotors to make relative movement in the cylinder to compress and transport gas. This blower has simple structure and is easy to manufacture. It is suitable for gas transmission and pressurization in low pressure occasions, and can also be used as a vacuum pump.

The following is a brief introduction to what needs to be mastered when operating Roots blower:

1. The content of particles in the medium shall not exceed 100mg/m ³， The particle size shall not exceed half of the working gap.

2. The clearance between Roots blower impeller and casing, impeller and side plate, impeller and impeller has been adjusted when leaving the factory, and the clearance shall be within a reasonable range when reassembling.

3. The operating pressure shall not be higher than the pressure generating range specified on the nameplate.

4. Strictly speaking, the inlet air temperature of the conveying medium shall not be greater than 40 ° C.

5. When Roots blower is running, ensure that the lubricating oil is in the middle of the red point of the oil window. During operation, the bearing temperature shall not be higher than 95 ° C, and the lubricating oil temperature shall not be higher than 65 ° C.