How is the insufficient air volume of Roots blower caused?

The insufficient air volume of Roots blower after a period of operation is usually not a quality problem, but due to inadequate daily maintenance. The common causes of insufficient air volume of Roots blower and corresponding solutions will be introduced below to help users eliminate faults in time.

The air inlet filter is blocked:

Cause: The air inlet filter is blocked, resulting in a decrease in air inlet volume, which leads to insufficient air volume.

Solution: Clean or replace the inlet filter regularly to ensure smooth air inlet.

Belt slip:

Cause: Belt slipping will cause power loss transmitted by the motor, making the fan unable to operate normally, thus leading to insufficient air volume.

Solution: Adjust the belt tension to ensure that the belt is properly tensioned and solve the problem of belt slipping.

Duct air leakage:

Cause: Air leakage of the pipe will cause air volume loss and affect the normal operation of the fan.

Solution: repair the air leakage of the pipeline to ensure the tightness of the pipeline system to solve the problem of insufficient air volume.

Roots blower, as a constant flow fan, has a basically constant air volume. In addition to the above reasons, its output pressure is mainly affected by changes in pipes and loads. Users need to maintain regular maintenance in daily use to ensure the normal performance of the fan.

The above is all the reasons for "how is the insufficient air volume of Roots blower caused?" I hope this article can help you!