Current location: home page > news information

Disassembly steps and precautions of Roots blower _ Roots blower

Source: Roots blower manufacturer Published on: November 22, 2021-12 Hits:

Shandong Xinqianshun Machinery Co., Ltd. is located in Zhangqiu District, which is famous for its clear spring water and is known as the "Little Spring City". Since ancient times, the industry and commerce have developed, and the transportation and communication are very convenient. Jiaoji Railway is located in the city. The geographical position is very superior, and the financial, cultural, educational, health and other infrastructure is complete
It has a good investment environment. Shandong Xinqianshun Machinery Co., Ltd. is a professional manufacturer of Roots blower, Roots blower and rotary fan. An enterprise integrating design, development, production and trade, with CNC processing equipment and testing means. And has engineers
Professional technicians with technical development ability and perfect monitoring system. While establishing a sales network covering more than 30 provinces, cities and regions in China, we have also established a corresponding after-sales service network. We must do our best to meet customers
After sales service requirements.
If the roots blower we use is broken and needs to be repaired by ourselves, then we need to disassemble and assemble the roots blower. How can we disassemble and assemble the roots blower? What are the loading and unloading steps? Let's take a look at the disassembly steps of Roots blower

Disassembly steps of Roots blower _ Roots blower

1. To disassemble the roots blower, we need to remove the head of the roots blower first, that is, separate the motor of the blower from the main working part of the roots blower;
2. Then draw out the lubricating oil in the gear box, remove and place the oil tank;
3. Remove the fan end cover, remove the end cover shell and place it in a safe place;
4. Remove the gear, remove the oil tank gear and place it properly;
5. Dismantle the rotor, remove the rotor and place it in a recyclable place in case it cannot be found during installation;
6. Finally, remove the impeller.

Precautions for removal of roots blower roots blower

The removal methods of roots blowers are different due to different structural forms. However, the following points should be noted before removal:

1. Before disassembly, the assembly clearance between the disassembled parts shall be measured, and the assembly positions of key components, such as the synchronous gear of the blower, shall be recorded to avoid errors during reassembly.
2. The dismantled joint surface mat and adjusting shim shall be kept properly, their assembly position shall be recorded, and their thickness shall be measured as the basis for assembly.
3. For some components with high assembly accuracy, such as the wheel and gear ring of the synchronous gear of the blower, if the gear ring is not found damaged, do not easily remove the bolt to drive out the pin, because this assembly accuracy directly affects the clearance of various parts of the blower.
4. For different parts, proper tools should be selected to disassemble them so as not to damage the parts, affect the assembly quality, or even cause the equipment to fail to operate normally.

The following figure is Roots blower Factory photo

Disassembly steps and precautions of Roots blower