Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information

Installation steps, skills and adjustment of Roots blower - provided by Xinqianshun Roots blower manufacturer:

Source: Roots blower manufacturer Published on: November 22, 2021-12 Hits:
Installation steps of Roots blower Roots Blower Pay special attention to the safety of roots blower machine and personnel. Therefore, the following safety measures should be taken:.
1. Carefully read the operation manual and product sample manual of Roots blower, and be familiar with and understand the specification, form, impeller rotation direction and air inlet and outlet direction of Roots blower; Check whether all parts of roots blower are in good condition again to ensure safe and stable operation; otherwise, repair them before installation and use to avoid safety failure.

2. The safety production device shall be installed when Roots blower is installed to prevent accidents, and it shall be installed and wired by professional social personnel who know the safety operation regulations in detail.

Installation steps, skills and adjustment of Roots blower

3. The air duct connecting the inlet and outlet of Roots blower has separate support, and the overlapping part of the air duct shall not be added to the fan components. When installing the fan, attention shall be paid to the horizontal position balance of the fan, and the connection between the fan and the foundation and the air outlet pipe shall be adjusted to make it fit naturally. Forced connection is not allowed.
4. After the roots blower is installed, move the protective element by hand or lever to check whether there is too tight or friction, whether there is any object that hinders rotation, and it can only be started if there is no abnormal phenomenon. The operation can be tested. The exposed part transmitted by the roots blower should have a protective cover. If the entrance of the roots blower does not take over the road, it needs to add a protective net or other installation equipment. Therefore, we need to pay attention to this piece of information.
5. The electric cabinet of Roots blower is matched with the corresponding fan (composed of power supply, voltage, pneumatic mode, control mode, etc.).
6. The wiring of Roots blower shall be carried out by professional electricians, and the wiring shall be correct and reliable. Non professionals are not allowed. In case of safety failure, the loss is irreparable. In particular, the wiring number of the electrical cabinet should correspond to the number on the fan terminal. The shell of roots blower shall be reliably grounded, and the grounding shall not be replaced by zero.
7. After all roots blowers have been installed, check whether there are any left tools and installation tools in the internal control of roots blowers, otherwise the normal operation of roots blowers will be affected.