Current location: home page > news information

Requirements for pipe installation of Roots blower:

Source: Roots blower manufacturer Published on: November 18, 2021 Hits:

Attention shall be paid to pipe installation of Roots blower:

After the customer purchases the fan, some problems often occur when installing Roots blower, such as the need to match the pipe with the fan. Xin Qianshun summarizes the problems encountered by the customer:

In some working conditions, the pipe diameter is inconsistent with the diameter of Roots blower. What should be done? In this case, a reducer pipe can be purchased separately. The characteristics of the reducer pipe are:,

One end is thick and the other end is thin. We can connect the pipe and the fan according to our needs. Just like ordinary water pipe installation, we need to use a reducing tee.

Roots blower pipes are not on the same horizontal line:

If our Roots blower It is not on the same level as the pipeline. How can we solve this problem? We can purchase a soft link with rubber in the middle

A certain elasticity is also called elastic joint, which can solve the problem of not being on the same horizontal line, and can connect the fan and the pipeline.
Large deviation of Roots blower pipe:

If there is a large deviation between our fans and pipes, which can neither be connected by software industry nor by reducing pipes, we can only deal with it by bending pipes,

The pipe connects the fan and the pipe, but in the actual use process, we cannot add too many elbows. Too many elbows will cause the pressure of the fan to increase, thus wasting energy and reducing the pressure of the fan

Service life of blower.

Therefore, when we purchase the fan, we should combine the pipe diameter and the required operating position with a series of parameters to inform the manufacturer that the most appropriate configuration can make it easier to use.

If you encounter any problems in use, please contact us, and professional technicians will answer them for you.
Article term tag: Roots blower

Previous: Speed parameters to be considered for selection of roots blower

Next: Installation steps, skills and adjustment of Roots blower - provided by Xinqianshun Roots blower manufacturer:

Back to list