Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information

What are the reasons that roots blower cannot aerate?

Source: Roots blower manufacturer Published on: November 10, 2021 Hits:
What causes the Roots blower to fail to aerate?
 
Roots blower The most common aeration is sewage treatment. Let's first talk about the basic principle of Roots blower sewage treatment aeration:
 
In the sewage treatment industry, oxygen is required to be pumped into the sewage pool for microbial oxidation and decomposition. In the sewage treatment industry, Roots blower can provide quantitative oxygen according to different water depths and different tonnage of treated water to promote microbial oxidation and decomposition.

Roots blower is the core equipment in sewage treatment. The working efficiency of the blower can directly determine the effect of sewage treatment. For sewage treatment by biological method, in order to promote the growth of aerobic microorganisms, sufficient oxygen must be provided. Aerobic microorganisms can promote the development of metabolism and decompose suspended solids, nitrogen, phosphorus and other organic compounds in sewage.

What is the reason that roots blower cannot aerate

If there is insufficient aeration of roots blower, the whole sewage treatment process will be affected. Let's analyze the specific reasons


1. Parameter selection error
If the pressure is insufficient or the sewage treatment capacity is larger than the actual selection, insufficient aeration will occur. Such a situation requires us to provide accurate pressure and flow parameters, so that the roots blower manufacturer can match the appropriate roots blower
 
2. Failure of aeration disk
If the aeration disk is blocked in the process of sewage treatment, and a lot of blocking occurs, it will lead to insufficient aeration or no aeration. In this case, we need to replace a new aeration disk in time.
 
3. Roots blower parts fault
Long time operation of Roots blower will lead to aging and corrosion of part 1, sound or other problems, and sometimes the aeration volume will be reduced or cannot be aerated. In this way, we need to conduct regular maintenance. If we need to refuel, we need to refuel. Pay attention to the maintenance of Roots blower
 
4. Pipeline damage
During the aeration of Roots blower sewage tank, the pipeline blockage will affect the aeration amount; The length of the pipeline and the number of bends will also affect the aeration rate.
The above is the analysis of insufficient aeration of Roots blower. If you have any technical problems, please consult us to solve them.