Current location: home page > news information

How to solve the problem of water inflow of rotary blower:

Source: Roots blower manufacturer Published on: November 18, 2021 Hits:

Rotary fan（ Rotary blower ）What about water?

Answer: Drain the accumulated water in the rotary blower room.

How to deal with the water inlet motor of the rotary fan (rotary blower)?

Answer: How to deal with the rotary blower motor: remove the motor from the base, open the front and rear end covers of the motor, take out the rotor, and screw all the end cover screws into the screw holes at both ends of the stator (to prevent the stator from damaging the windings when it is erected). Stand up the stator and expose both ends to the sun for 12 hours, and measure the insulation resistance between the winding and the housing with a megger, which shall not be less than 20 megohm. If not, continue to expose it in the sun until it reaches the standard.

How to deal with the water inlet host of the rotary fan (rotary blower)?

Answer: Treatment method for rotary blower host: pull off the oil return pipe from the base, drain the oil and water from the host and the air chamber, remove the air filter, quickly rotate the fan pulley in a positive direction by hand for about 10 revolutions, and then slowly pour oil (5 liters of 68 # anti-wear hydraulic oil) from the air inlet, while constantly rotating the fan pulley in a positive direction to drain all cleaning oil.

How to deal with the main oil tank with water entering into the rotary fan (rotary blower)?

Answer: How to deal with the oil tank: first remove the oil pointer with a wrench, then remove an oil filter, tilt the base, try to drain the waste oil in the oil tank, and clean the oil tank with new engine oil. Install the oil filter, oil return pipe and air filter, fill the oil tank with oil to 3/4 of the oil tank, and tighten the oil pointer.

Rotary fan

Rotary fan (rotary blower) manufacturer introduction:

Shandong Xinqianshun Machinery Co., Ltd. is a professional Roots blower supplier integrating design, development and sales. The company's products include Roots Blower Roots vacuum pump, centrifugal fan, rotary blower, single-stage high-speed centrifugal blower, countercurrent cooling vacuum pump. It mainly produces Roots blower, which absorbs advanced technology and relies on a new generation of high-efficiency and energy-saving products developed by scientific research institutes. With reasonable structure, small size, high efficiency, low noise, stable operation, long service life, convenient maintenance and other characteristics, it is widely used in sewage treatment, mining, metallurgy, chemicals, building materials, electricity, light industry, flour, aquaculture and other fields. Over the years, it has been well received by users.

Rotary blower manufacturer's telephone