Installation diagram and precautions of Roots blower

Installation site drawing of Roots blower:

1. It is the silencer at the inlet of Roots blower, and the silencer can be installed only by tightening the bolts;

2. This is the outlet silencer. Pay attention to tear off the plastic paper at the flange during installation;

3. This refers to soft connection. In order to ensure the safety of equipment during operation, bolts can be tightened;

4. This is the connection between the outlet silencer and the pipe, which cuts off the connection between Roots blower and the pipe;

5. It is the base of roots blower, which is convenient for stable storage of roots blower.

6. It is the dust proof and sound proof cover of Roots blower belt, which protects the good operation of the belt;

7. It is the outlet silencer, and the fan can reduce the noise during operation;

8. The check valve of Roots blower is generally installed at the outlet of silencer to prevent gas backflow;

9 The pressure gauge and relief valve are installed between the soft connection and the silencer inlet, so that the pressure changes can be seen intuitively when the roots blower is running, and the pressure can be adjusted as the demand changes.

Roots blower Precautions for installation of:

Roots blower should not be installed in places where people often go in and out to prevent injury or scalding.