Roots blower for aquaculture can promote the healthy growth of fish, shrimp and crab!

The aquaculture roots blower can not only promote the self purification of the pond, but also increase the oxygen of the water body to change the ecological environment of the pond and the water quality of the pond. It can promote the health and rapid growth of fish, shrimp and crabs!

Shandong Xinqianshun Machinery Co., Ltd. is a company specializing in the production of Roots blowers, Roots blowers and other mechanical equipment, located in Zhangqiu District, Jinan City, known as the "Little Spring City". In recent years, Xinqianshun Roots blower manufacturers have been committed to the research and development of new products, including double tank Roots blower, water-cooled Roots blower, oil driven Roots blower, low-noise Roots blower, It has won market praise and recognition.

Such products have been widely used in electric power, sewage treatment, environmental protection, chemical industry, steel, building materials, agriculture, pharmacy and other industries. The products and services are exported to all parts of the country and Southeast Asia, and are well received by customers.

Roots blower aeration technology is a new type of pond aquaculture technology developed in recent years. Taking the Roots blower produced by Xinqianshun Roots blower factory as an example, the advanced nanotechnology is used as the working principle to compress the air into the nanotubes distributed near the bottom of the pond for inflation, so as to achieve the effect of three-dimensional oxygen increase from the bottom of the pond.

Compared with the traditional surface mechanical oxygenation, it has the advantages of uniform oxygenation area, balanced oxygenation level, less mechanical energy consumption, and obvious effect of improving the bottom environment. When Roots blower is used as an aerator, the following points should be noted:

① Replace the microporous tube in time if it is found to be broken;

② The micropore is blocked due to too much algae adhesion. Pat gently after drying for one day to shake off the attachment, or soak 20% washing powder for one hour to clean it, and then dry it for reuse (put it into the warehouse after cleaning at the end of the breeding cycle);

③ Clean the filter screen of the air inlet filter within 4 months;

④ Ensure that the power box does not leak electricity;

⑤ Add gear oil and grease to roots blower regularly for maintenance (once every two months, half of the gear oil pointer is enough);

⑥ Rust prevention in plum rain season;

⑦ In high temperature season, it is necessary to prevent exposure to the sun, and can set up a arbor;

⑧ If the interface is loose, fix it in time;

⑨ At the end of the production cycle, it shall be stored in the warehouse after disassembly (the inlet and outlet of Roots blower shall be free of moisture to prevent rust from affecting the use in the next year)

For the hot problem of Roots blower, Haohe blower also gives other precautions

Pay attention to these five points in the aeration of roots blower, which is more efficient:

① The aeration disks and roots blowers shall be reasonably configured. If the number of aeration disks is far lower than the number of reasonably configured aeration disks of roots blowers, the motor will burn.

② The water depth should also be reasonably matched with Roots blower.

③ Each Roots blower motor incoming line is equipped with a phase failure overload protector

④ The outlet of Roots blower shall be connected with several 63 supervisors as many as possible.

⑤ The gear oil and grease of Roots blower shall be filled regularly.