The working efficiency of Roots blower directly affects the process of work. If the efficiency in production is not high, it directly affects the intuitive benefits of the enterprise, and the output value cannot be reached, it will cause great losses. We all care about the efficiency of Roots blower, and do not understand the professional knowledge of the industry. The technicians of Roots blower manufacturer make an analysis: whether the efficiency is high or not depends on the following points:
1. Based on the effect of temperature, it has been proved through a lot of practice that Roots blower can work at the medium temperature of 30~50 degrees, and can play the best role. With the rise of temperature, bubbles existing in the liquid will block the sound wave and weaken the ultrasonic wave, thus affecting the work efficiency and blocking the work process.
2. Under the action of frequency, the frequency of roots blower is 20-30hz in general. The lower the frequency, the more obvious the working cavitation effect is; On the contrary, the higher the frequency, the worse the cavitation efficiency of roots blower. For the blower efficiency involved in the frequency factor, we can think that: low frequency dirt is used for the roots blower which is difficult to work; High frequency, suitable for precise blast field. Therefore, according to different ore properties and ceramic plate pollution, the frequency generated by the ultrasonic generator can be properly adjusted according to the site conditions.
3. Impact of sound intensity on roots blower. Many practices have proved that when the sound intensity is controlled at about 1~2w/m2, the working effect of roots blower will be better.
4. If Roots blower is placed in a well ventilated place, its working efficiency will be higher, while if it is blocked in an unventilated environment, its working efficiency will be lower. Therefore, we suggest that the site environment should be properly handled before the Roots blower enters the site.
Conclusion: The above four points are all external factors that affect the working efficiency of roots blower, and internal factors are the design factors of roots blower. If your roots blower is low in working efficiency, you can replace it with a more advanced fan after eliminating the above factors. Please contact Roots blower manufacturer , give you a detailed plan!
