Current location: home page > news information > Roots blower information

How to select high pressure water-cooled roots blower?

Source: Roots blower manufacturer Published on: February 21, 2022 Hits:

Roots blower When the pressure exceeds 58.8kpa, it is a high pressure roots blower. Generally, the manufacturer recommends users to choose a fan with a water-cooled cooling device structure, but some customers will refuse to use the water-cooled fan because of the inconvenience of circulating water. The pressure is within the range of 80kpa and above 60kpa, If the rotating speed of the fan is not high, the fan with air-cooled double oil tank structure can also be selected, but the bearing must be purchased from imported NSK and SKF brands. When the pressure exceeds 80kpa, the user must choose the fan with water cooling device, not because the site is inconvenient or the operation is boring, Also, regularly check whether 220 # gear oil of high-pressure water-cooled roots blower is mixed with water and other pollutants and deteriorates during daily use. If it deteriorates, please replace it in time.

Regularly check the components for oil leakage and repair them. If they cannot be repaired, please inform the manufacturer immediately. Always check the operation status of the high-pressure roots blower and motor. If the noise and temperature are abnormal, please stop using. Regularly check the air filter of the blower for dirt. If it is dirty, please remove the air filter, unscrew the wing nut, remove the cover, clean the filter sponge, and take care not to drop the removed dirt into the fan inlet mouth when removing the filter.

Previous: What is the difference between Roots blower and centrifugal fan?

Next: How to deal with the water inflow inside the three blade roots blower?

Back to list