High pressure roots blower This is a kind of equipment with simple structure and convenient manufacturing, which is suitable for various low-pressure occasions. It keeps the two rotors engaged through the synchronous gear at the end of the rotor shaft of the compressor. Then let the high-pressure roots blower select the small editor to introduce the main functions of this equipment to you.
The main characteristics of the high-pressure roots blower are that when the pressure is adjusted within the allowable range, the flow change is very small, the pressure selection range is wide, and the forced gas transmission is featured. The medium does not contain oil during transportation. The utility model has the advantages of simple structure, convenient maintenance, long service life and small vibration of the whole machine.
The pulsation of air flow velocity and pressure caused by periodic suction, exhaust and instantaneous constant volume compression produces greater aerodynamic noise. In addition, the clearance between rotors of high-pressure roots blower and between rotors and cylinders leads to gas leakage, which reduces efficiency. The high-pressure roots blower has a displacement of 0.15 to 150 cubic meters per minute and a speed of 150 to 3000 rpm. The single-stage pressure ratio is usually less than 1.7 and up to 2.1, which can be used in multiple stages. During the normal operation of the high-pressure roots blower, the bearing temperature, lubricating oil in the fuel tank, motor, etc. shall be checked every 1 to 2 hours, and the temperature shall not be higher than the specified value. The high-pressure roots blower is very noisy during operation. In order to reduce the noise, in addition to installing the silencer, some simple methods can also be used to reduce the noise, such as the underground method.
Shandong Xinqianshun Machinery Co., Ltd. is a professional Roots blower supplier integrating design, development and sales. The company's products include Roots blower Roots blower Centrifugal fan, rotary blower, single-stage high-speed centrifugal blower, countercurrent cooling vacuum pump. It mainly produces Roots blower, which absorbs advanced technology and relies on a new generation of high-efficiency and energy-saving products developed by scientific research institutes. With reasonable structure, small size, high efficiency, low noise, stable operation, long service life, convenient maintenance and other characteristics, it is widely used in sewage treatment, mining, metallurgy, chemicals, building materials, electricity, light industry, flour, aquaculture and other fields. Over the years, it has been well received by users.
