How to improve the pressure resistance of Roots blower?

Many friends are not very clear about the working pressure problem of Roots blower. You should first understand this problem. In other words, the working pressure of the front pipe of the barometer of the Roots blower belongs to the capacity rotating centrifugal fan, so the working pressure of the front pipe is the working pressure of the Roots blower, and the barometer indicates the working pressure of the front pipe.

How to improve the pressure resistance of Roots blower:

1. Replacing the motor is both an immediate and a reasonable way. If the same number of motors with higher output power are replaced, the shrinking working capacity of Roots blower will be increased immediately and reasonably. Moreover, this is usually a reasonable way not to change the number of Roots blowers.

2. Under the special working pressure, if the main parameters of the blower motor have been exceeded, immediately remove and replace the Roots blower with a larger capacity, and resist the excessive working pressure of the pipeline.

3. Many netizens commented that the speed ratio can increase the working pressure of Luoci fans. It is shown here that the only way to change the speed ratio of roots blower is to change the exhaust air volume of roots blower, which has no practical effect on the rise of working pressure.

4. Can removing and changing the movable pulley increase the working pressure? Dismantling and replacing the moving pulley is a way to change the speed of Roots blower, so it is impossible to increase the working pressure.

5. What to do if Roots blower is over pressured. Too much work pressure and not enough work pressure are two different things. I have been talking about the problem of insufficient work pressure. How to increase work pressure? Over pressure does not need to replace Roots blower. It is OK to install a master on the pipeline to reduce the working pressure of the pipeline. However, there is a defect in doing so, which is that resources cannot be saved.

The net weight of Roots blower is affected by various factors such as tape drive, motor, raw materials, model and specification. The net weight of Roots blower changes.

The above is what I have collected for you. Please contact us if you need.