Current location: home page > news information > Company News

Instructions for special gas conveying roots blower roots blower

Source: Roots blower manufacturer Released on: December 4, 2021 Hits:

Roots Blower, I believe you are not unfamiliar with this word when you enter our website, so let's take you to understand, "Roots Blower was invented by British George Kings in 1849, and later improved and promoted by the American Roots Brother, which gradually gained wide recognition and application, because the Roots brothers applied for the trademark" Roots ", Therefore, it is well known to ordinary people: Roots blower, as its name implies, is used for blowing, blowing air, blowing gas, which is widely used in industry, agriculture and aquaculture. In combination with past user experience, Xinqianshun has sorted out some common and popular products for you:

In the previous article, we learned about the Roots blower in series with two machines. Now let's learn about the Roots blower for special gas:

Roots blower for pneumatic conveying

Roots blower for special gas Operating instructions:

1. The inlet temperature of the conveying medium usually does not exceed 40 ° C.

2. The content of particles in the medium shall not exceed 100mg/m3, and the maximum size of particles shall not exceed half of the minimum working gap.

3. The bearing temperature in operation shall not exceed 95 ° C, and the lubricant temperature shall not exceed 65 ° C.

4. The pressure used shall not exceed the pressurization range specified on the nameplate.

5. The clearance between the impeller and housing, impeller and side plate, impeller and impeller of Roots blower have been adjusted in the factory. The clearance shall be ensured during reassembly.

6. When roots blower is running, the oil level of main oil tank and auxiliary oil tank must be between the two red lines of oil level gauge.

Roots blower for special gas transportation

Cooling method of Roots blower for special gas:

1. Generally, roots blower has sound insulation equipment. In summer, open the door of the acoustic enclosure. The acoustic enclosure forms a mail space to increase the ambient temperature, thereby increasing the inlet air temperature and outlet temperature. The inlet temperature of many Roots blowers with sound insulation covers is higher than 45 ℃ in summer.

2. Roots blower is installed indoors. Conditional air conditioners can be installed. Don't worry about air conditioning and electricity. The expected life of the motor is much shorter because the temperature of the motor rises by 10 degrees. Therefore, indoor air conditioning can extend the service life of equipment and reduce the outlet temperature.

3. Reducing inlet and outlet pressure helps to reduce temperature.

4. Reduce pipeline bending to minimize pipeline pressure loss and other pressure losses.

Roots blower for special gas can be used to transport gas, biogas, natural gas and other special gases. The products need to be customized. If you need, please consult the customer service website for detailed answers!

The above is a detailed introduction to the use and operation of special gas roots blower in roots blower. Please continue to pay attention, and we will continue to update. The next article is the application of roots blower in industry.
Word tag: Roots blower
Article address: //wuhanzhcs.com/html/news/n02/847.html

Previous: What is the meaning of pressure in the model parameter table of Roots blower? Shandong Xinqianshun Roots blower manufacturer

Next: What should I do if the Roots blower motor is too hot and the current is too high, causing it to burn_ Roots Blower

Back to list