1. Store in clean, dry and vibration free rooms; The equipment is coated with antirust oil when it is supplied. It can be stored for 12 months in a normal dry environment without damage to the packaging. If it needs to be stored for more than 12 months, it needs to be coated with the same antirust oil again. If necessary, nitrogen filled packaging can be used for protection, and inspection shall be conducted every 6 weeks; The V-belt needs to be removed during storage.
2. When the shutdown time exceeds 6 weeks, protect the transmission chamber, rotor and other smooth surfaces. Place the whole machine on a flat and vibration free ground. If necessary, use expansion bolts to connect the whole machine to the ground. In this case, only one bolt is needed for fixing each shockproof foot.
3. Remove the packaging materials, and ensure that there are no sundries at the air inlet and exhaust port of the models with sound insulation covers. Ensure that the air at the air inlet and air outlet is sufficiently ventilated, and check whether the fan operates smoothly. The poor operation may be caused by impurities or distortion.
4. Remove the yellow plastic cap of the middle drain hole before the equipment is put into operation. During operation, a small amount of gas will leak out to flush out the condensation. If the medium is a special gas, these parts will be plugged. If the medium has condensation, the condensate can be discharged through the gas tank, gas pipe or short-term low opening according to the operating conditions. In order to avoid electric leakage, the acoustic enclosure, motor and base should be grounded. The pipes connected through elastic joints or expansion joints shall be reliable and stable. Refer to the nameplate or the label in the junction box for the motor wiring technical parameters. Please note that the motor operating instructions are supplied separately and the wiring is completed by a professional electrician.
Shandong Xinqianshun Machinery Co., Ltd. is a professional Roots blower supplier integrating design, development and sales. The company's products include Roots Blower Roots vacuum pump, centrifugal fan, rotary blower, single-stage high-speed centrifugal blower, countercurrent cooling vacuum pump. It mainly produces Roots blower, which absorbs advanced technology and relies on a new generation of high-efficiency and energy-saving products developed by scientific research institutes. With reasonable structure, small size, high efficiency, low noise, stable operation, long service life, convenient maintenance and other characteristics, it is widely used in sewage treatment, mining, metallurgy, chemicals, building materials, electricity, light industry, flour, aquaculture and other fields. Over the years, it has been well received by users.
