Current location: home page > news information > Roots blower information

How to solve the problem of insufficient air volume of Roots blower? Roots blower manufacturer will give you a detailed explanation!

Source: Roots blower manufacturer Published on: February 25, 2022 Hits:

Roots Blower Some faults often occur when using. Today, I will take you to understand the reason for insufficient air volume of Roots blower.

The filter at the inlet of Roots blower is blocked: the silencer at the inlet of Roots blower contains a filter, which has the effect of filtering impurities in the air. After a long time, there are too many impurities accumulated inside. If the inlet is blocked, the air volume will be reduced. Therefore, we need to clean the inlet filter regularly to keep the air inlet unblocked.

The pipe is too long: if the pipe is too long and the pressure is insufficient, the air volume will also be insufficient. At this time, the pipe needs to be reset.

How to solve the problem of insufficient air volume of Roots blower?

Pipe blockage: during the operation of Roots blower, we cannot ensure that the pipe is unblocked at all times. If the pipe is blocked for some reasons, the pressure will increase. At this time, the air volume will be unstable, resulting in the instantaneous air volume being too high or too low. If this situation occurs, we must stop the machine in time to check.

Belt slippage: no matter how good the quality is, the belt also has a life span. If the time is long, the belt should be replaced in time. Also, the V-belt should be adjusted at intervals during use. If the belt is loose, we regret the slippage or insufficient air flow of the fan.

Pipe air leakage: Roots blower is a pipe fan, which transports gas through pipes. The damaged pipe gas will naturally cause insufficient air volume when it runs into the air, so the field staff should check in time at ordinary times. If the pipe is damaged or leaked, it should be repaired in time.

The above is the reason for the insufficient air volume of Roots blower. I believe you will know why the air volume of Roots blower is insufficient after reading it.

Previous: How to solve the water inflow problem of Roots blower? Roots blower manufacturer has a good idea!

Next: Answer from Roots blower manufacturer: Is the quotation of Jiangsu high-pressure Roots blower high?

Back to list