Online Message | contact us | chinese | Welcome to the official website of Shandong Xinqianshun Machinery Co., Ltd!
Roots blower manufacturer
National hotline 0531-83663588
Current location: home page > news information > Roots blower information

Precautions for cleaning Roots blower

Source: Roots blower manufacturer Published on: February 21, 2022 Hits:

   Roots Blower When starting, first, run the empty car for 20-30 minutes, and observe that all fans are normal. If any influence or friction is found, stop the inspection immediately and eliminate the fault. After the empty machine runs normally, turn on the load again. When the fan is in normal operation, gradually adjust the outlet valve (or gradually close the safety valve), gradually push the load to the rated pressure, but do not overload the operation. It is absolutely prohibited to close when starting, and the inlet and outlet gate valves will stop suddenly when they are incomplete.

For equipment cleaning, if the equipment is not cleaned, it will affect the next use. Many operators can use Roots blower, but they may not be able to clean it. If they cannot clean it, it will inevitably bring some trouble.
1. The interior of Roots blower equipment cannot be wiped with a wet rag. If the water drops on the rag fall into the equipment, its use will be affected. Therefore, it is better to wipe the inside of the equipment with a clean cotton cloth.
2. The cleaning of Roots blower motor must be careful to avoid oil drops falling into the motor. For the cleaning of the motor, we can use a dry cleaning brush.
3. After the cleaning of Roots blower equipment is completed, the external and internal parts of the equipment need to be cleaned with a dry rag to keep the equipment dry enough to avoid moisture.
When cleaning Roots blower, pay attention to the above three requirements. The best way to prevent failures in the operation of cleaning roots blower is to take correct cleaning methods and clean the equipment regularly.
When cleaning Roots blower, pay attention to the above three requirements. The best way to prevent failures in the operation of cleaning roots blower is to take correct cleaning methods and clean the equipment regularly. Routine maintenance of roots blower shall be carried out to reduce the occurrence of faults of roots blower.
The cleaning of Roots blower motor must be careful to prevent oil and water drops from falling into the motor. For the cleaning of the motor, we can use a dry cleaning brush. The external and internal parts of the equipment need to be cleaned with a dry rag to keep the equipment dry enough to avoid moisture.