Current location: home page > news information > Roots blower information

Daily maintenance and commissioning of Roots blower

Source: Roots blower manufacturer Published on: February 19, 2022 Hits:

Roots Blower It is a driven fluid machine that relies on the input mechanical energy to increase the gas pressure and discharge gas. The blockage of the fan will directly affect the operation of the whole mechanical process, so its maintenance is very important

Maintenance measures for high-pressure roots blower:

1. Clean the fan room regularly to keep it clean and well ventilated.

2. Regularly check whether the oil dripping condition of the oil drip nozzle is normal. If the oil drip nozzle is dirty, remove the adjusting screw for cleaning.

3. Regularly check the flexibility of the safety valve. If it is not flexible, please clean and debug it to ensure reliable opening and closing.

Daily maintenance and commissioning of Roots blower

4. Regularly check whether the high pressure roots blower oil deteriorates due to mixing with water and other dirt. If it deteriorates, please change the oil in time.

5. Regularly clean the filter of high-pressure roots blower.

6. Regularly check whether there is oil or gas leakage and repair it. If it cannot be repaired, please immediately notify the manufacturer.

7. Frequently check the operation condition of the high pressure roots blower and motor, and timely shut down for maintenance in case of abnormal noise and temperature.

8. Regularly check whether the air filter of high-pressure roots blower is dirty. If it is dirty, remove the air filter, unscrew the butterfly nut, remove the cover, clean the filter sponge, and pay attention not to drop dirt into the fan cavity when removing the filter.

Precautions for commissioning of high-pressure roots blower:

1. Check the fastening of each part and whether the locating pin is loose.

2. There is no oil leakage inside the blower; There should be no scaling, rust and peeling in the body.

3. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of the lubricant, often listen to the operation of the blower for noise, pay attention to whether the unit operates under the conditions that do not meet the requirements, and pay attention to adding grease regularly.

4. The overload condition of the blower will not be displayed immediately sometimes, so pay attention to the increasing trend of air inlet and exhaust pressure, bearing temperature and motor current to determine whether the machine operates normally.

5. Before disassembling the machine, measure the matching size of the machine, make a record, and mark the parts to ensure that the original matching requirements are maintained after assembly.

Previous: Causes of excessive bearing temperature of Roots blower

Next: Requirements and standards for the installation of roots blower, and what should be paid attention to in the installation of roots blower?

Back to list