What are the environmental requirements for the installation and commissioning of Roots blower and the operation of Roots blower?

   Roots blower There are three modes of vibration allowed by the machine, namely amplitude, vibration speed and acceleration. According to the standards specified by each specialty: the forging hammer adopts amplitude and acceleration as the allowable values; The amplitude of crusher and motor is the allowable value; The compressor and ventilator take the amplitude as the control standard at low speed, and the Roots blower takes the vibration speed as the control standard at medium and high speed. The height of the foundation shall meet the structural requirements, that is, to ensure that there is sufficient concrete protective layer at the bottom of the bolt embedded parts, and the pit bottom shall be as thin as possible under the condition of a certain thickness (guaranteed strength), which can reduce the disturbing moment for the compressor and ventilator foundation with horizontal disturbing force, so as to reduce the amplitude generated by the coupled vibration of horizontal swing. The centrifugal blower transmits the mechanical energy of the motor to the liquid by the action of the rotating impeller on the gas.