Roots Blower Maintenance Skills and Troubleshooting (II) _ Roots Blower

In daily industrial operation, the insufficient air volume of Roots blower has caused many problems. Here are the reasons and solutions:
Roots blower maintenance - causes of insufficient flow of roots blower:                                                  
(1) Inlet filtration is blocked;                                
(2) The impeller is worn and the clearance increases too much;              
(3) Belt slipping;                                      
(4) Large inlet pressure loss;                             
(5) The pipeline causes ventilation leakage.        
  Roots blower maintenance - Roots blower flow Solution:
(1) Remove the dust and blockage of the filter;
(2) Repair clearance;
(3) Tighten the belt and increase the number of belts;
(4) Adjust the inlet pressure to the specified value;
(5) Check and repair pipes.
The following figure is Roots blower picture

The above is the reason and solution for insufficient flow of roots blower. The next article is the maintenance skills and fault solution for roots blower (III) Oil leakage or leakage into the casing of roots blower

Word tag: Roots blower
Article address: //wuhanzhcs.com/html/news/n02/870.html