Current location: home page > news information > Roots blower information

How to adjust Roots blower? The following points should be noted:

Source: Roots blower manufacturer Published on: March 10, 2022 Hits:

1. Check the fastening of each part and whether the locating pin is loose.

2. There is no oil leakage inside the blower body.

3. There shall be no scaling, rust and scaling inside the blower body.

4. Pay attention to whether the lubrication and heat dissipation are normal, pay attention to the quality of lubricating oil, often listen to whether the blower runs noisily, pay attention to whether the unit operates under the condition that does not meet the requirements, and pay attention to adding grease regularly.

Roots blower

5. The overload of the blower is sometimes not displayed immediately, so pay attention to the increasing trend of the inlet and exhaust pressure, bearing temperature and motor current to judge whether the machine operates normally.

6. Before disassembling the machine, measure and record the matching dimensions of the machine, and mark the parts to ensure that the original matching requirements are maintained after assembly.

7. For new machines or overhauled blowers, the oil tank should be cleaned and put into operation according to the operating procedures. It is recommended to replace all lubricating oil after 8 hours of operation.

8. The maintenance and overhaul shall be carried out on schedule according to the specific use conditions, and a reasonable maintenance system shall be formulated and recorded. It is recommended to overhaul once a year, and replace bearings and relevant vulnerable parts.

　　9、 Roots blower It is recommended that professional maintenance personnel carry out overhaul.

The above is what needs attention during the commissioning of Roots blower. I hope it can help you!

Previous: What parts are supplied with Roots blower? Detailed explanation of Roots blower manufacturer!

Next: When selecting roots blower, the lower the speed, the better. How to calculate the speed?

Back to list