Current location: home page > news information > Roots blower information

How to install the belt of Roots blower?

Source: Roots blower manufacturer Published on: 2023-03-07 Hits:

Roots blower The installation of Roots blower is relatively simple, and you can install it by yourself with more attention. What problems should you pay attention to when installing the belt of Roots blower?

1. When installing the belt, the grooved pulleys of the two belt pulley devices should be aligned and not on different horizontal planes;

2. Since the belt is a consumable accessory, the belt shall not touch corrosive things to prevent damage to the belt;

3. When installing the belt pulley, pay attention to the rationality of force, and do not pry with force to prevent damage to the belt pulley;

How to install the belt of Roots blower?

4. Due to the raw materials of the belt, long-term use and long-term exposure will corrode it and cause aging. Therefore, the belt should be protected from exposure during the use of the device;

5. Generally speaking, the product Roots blower will be distributed after being installed. If you install the belt by yourself, pay attention to the orientation of the belt and the protective cover to prevent the gap from being too close, resulting in conflict and loss between the two;

6. If our Roots blower is equipped with multiple belts, when it is damaged and replaced, it should be replaced together. Do not select new and old belts for device use. The elasticity of the new and old belts will be different, and the selection of new and old belts will easily lead to uneven stress on the new and old belts.

Summary: The installation method of Roots blower belt is relatively simple. After a simple understanding, it can be installed independently. If you have any problems when purchasing, you can contact our official customer service hotline: 0531-83663588

Previous: When the rainy season comes in spring, how to maintain the Roots blower in rainy days?

Next: Why should Roots blower be commissioned? Which parts are usually debugged

Back to list