The safe operation and service life of Roots blower depend on whether it is regularly and correctly maintained, and attention should be paid to any accident signs. If the Roots blower is not used for a long time, all power supplies on its body should be cut off, and it should be placed in a ventilated and dry place, so as to effectively avoid rusting and other phenomena caused by long-term non use of the body. In addition, the roots blower should be oiled regularly during its use, so as to ensure the maximum flexibility of its operation.
The correct use method and daily maintenance can not only avoid the potential safety hazards in the use process, but also ensure that the fan will not strike without reason. If the Roots blower is not used for a long time, cut off all the power supply on its body and place it in a ventilated and dry place, so as to effectively avoid rusting and other phenomena caused by long-term non use of the body. At the same time, the Roots blower should be oiled regularly during its use, so as to ensure the flexibility of the operation of the Roots blower.
Pay attention to the following points during normal use:
1. Maintain it regularly. There will be many screws on the body of Roots blower, and these screws will become loose in the long-term use process. At this time, the user needs to carry out necessary maintenance on them, and eliminate safety hazards in time, so as to ensure the normal use and service life of the three leaf Roots blower.
2. The fan blade on the roots blower is the part of the whole machine body that is prone to problems. Therefore, the fan blade should be regularly inspected and maintained during the use of the three leaf roots blower. If the fan blade is found to have excessive noise or abnormal rotation, it is necessary to timely find professionals to repair the fan, Avoid the failure of the whole machine body due to the damage of the fan blade.
3. When disassembling the machine, measure the matching dimensions of the machine, make records, and mark and orient the parts to ensure that the original matching requirements can be maintained.
4. Sometimes the overload of Roots blower is not displayed immediately, so pay attention to the changes of inlet and exhaust pressure, bearing temperature and motor electricity to judge whether the machine operates normally.
5. Under normal conditions, the lubricating oil must be replaced when the unit operates for 1000 hours. Pay attention to whether the cooling condition of lubricating oil is normal, pay attention to the quality of lubricating oil, often listen to whether there is noise in the operation of Roots blower, and pay attention to whether the unit works under the condition that does not meet the requirements.
As long as attention is paid to maintenance during use, the service life of three leaf roots blower will be greatly enhanced. In the process of use, if there is something you don't understand, you must call the manufacturer in time to find the correct solution to avoid unnecessary loss.
I believe that after reading the above content, you should also have a better understanding of what problems you should pay attention to when using Roots blower. I hope it will help you.
Text label: Roots blower
Link to this article: //wuhanzhcs.com/html/news/n02/697.html
